Preparation of Chitosan Poly(methacrylate) Composites for Adsorption of Bromocresol Green

In the present study, chitosan poly(methacrylate) composites were prepared and applied for adsorption of bromocresol green from aqueous solutions. The synthesized composites were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The bromocresol green removal by the developed adsorbent was investigated, and the effects of experimental parameters, including sample pH and adsorption time, were also examined. Furthermore, the adsorption characteristics of the synthesized adsorbent, including kinetics, adsorption isotherms, and thermodynamics, were comprehensively studied. The adsorption isotherm was well described by the Freundlich model, and the maximum adsorption capacity was 39.84 mu g mg(-1) by shaking for 40 min at pH 2.0. Bromocresol green adsorption kinetics followed a pseudo-second-order kinetic model, indicating that adsorption was the rate-limiting step. Thermodynamic parameters and the negative values of Gibbs free energy change (Delta G degrees) showed that adsorption was a spontaneous process. The positive values of entropy change (Delta S degrees) implied that the adsorption of bromocresol green on chitosan poly(methacrylate) composites was an increasing random process. In addition, enthalpy change (Delta H degrees) values were positive, suggesting that the adsorption of bromocresol green was endothermic. The adsorption percentage of bromocresol green with chitosan poly(methacrylate) composites remained above 97% after three times of recycling test.