Effects of trailing-edge serration shape on airfoil noise reduction with zero incidence angle

被引:14
|
作者
Hu, Ya-Sen [1 ]
Zhang, Peng-Jun-Yi [1 ]
Wan, Zhen-Hua [1 ]
Liu, Nan-Sheng [1 ]
Sun, De-Jun [1 ]
Lu, Xi-Yun [1 ]
机构
[1] Univ Sci & Technol China, Dept Modern Mech, Hefei 230027, Peoples R China
基金
中国国家自然科学基金;
关键词
ACOUSTIC ANALOGY; FLAT-PLATE; SAWTOOTH; FLOW; FORMULATION;
D O I
10.1063/5.0108565
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
When controlling the trailing-edge (TE) interference noise of airfoil, the design of the TE serration shape is still an open issue. To this end, the flow and noise generation for different TE serration shapes are explored by the wall-resolved implicit large-eddy simulation and acoustic analogy. The feather-like serrations are found to achieve the most prominent noise reduction among the four types of curved serrations, especially in the low-frequency range. With the aid of acoustic analogy, the coherence analysis of far-field noise produced by the dipole sources on the airfoil surface is performed. The results show that destructive interference is still the critical mechanism responsible for noise reduction. Considering only the dipole sources, we find that the feather-like serrated TE shape can obtain the best noise reduction performance among all the serrated cases. Furthermore, since flow structures are reorganized near the TE serrations, we investigated the flow noise sources quantitatively in the near field. In these cases, the noise source due to flow structures is suppressed to a greater extent in the feather-like serrated case near the TE serration roots. Consequently, the above findings indicate that the feather-like serration favors suppressing dipole and flow noise sources in the near field, which makes it an efficient configuration for reducing airfoil noise.
引用
收藏
页数:16
相关论文
共 50 条
  • [1] Effects of serration angle on noise reduction mechanism of trailing edge serration
    Ahn, Edge Byunghyun
    Han, Dongyeon
    Lee, Soogab
    [J]. JOURNAL OF SOUND AND VIBRATION, 2024, 594
  • [2] Numerical study of trailing-edge noise reduction mechanism of wind turbine with a novel trailing-edge serration
    Song, Boyang
    Xu, Li
    Zhang, Kaijun
    Cai, Jingjing
    [J]. PHYSICA SCRIPTA, 2023, 98 (06)
  • [3] Airfoil Trailing-Edge Noise Reduction by Application of Finlets
    Gstrein, Felix
    Zang, Bin
    Mayer, Yannick D.
    Azarpeyvand, Mahdi
    [J]. AIAA JOURNAL, 2022, 60 (01) : 236 - 248
  • [4] A parametric study of serration design for trailing-edge broadband noise reduction
    Pereira, Lourenco Tercio Lima
    Avallone, Francesco
    Ragni, Daniele
    Scarano, Fulvio
    [J]. APPLIED ACOUSTICS, 2023, 211
  • [5] Influence of Nonflat Plate Trailing Edge Serration on Airfoil Noise Reduction
    Sumesh, C. K.
    Jothi, T. J. Sarvoththama
    [J]. JOURNAL OF AEROSPACE ENGINEERING, 2024, 37 (02)
  • [6] ON THE EFFECT OF TRAILING-EDGE BLUNTNESS ON AIRFOIL NOISE
    Tlua, Basim Al
    Rocha, Joana
    [J]. Canadian Acoustics - Acoustique Canadienne, 2022, 50 (01): : 5 - 10
  • [7] Reduction in Airfoil Trailing-Edge Noise Using a Pulsed Laser as an Actuator
    Ogura, Keita
    Kojima, Yoimi
    Imai, Masato
    Konishi, Kohei
    Nakakita, Kazuyuki
    Kameda, Masaharu
    [J]. ACTUATORS, 2023, 12 (01)
  • [8] Numerical analysis of airfoil trailing-edge noise for straight and serrated edges at incidence
    Romani, Gianluca
    Casalino, Damiano
    van der Velden, Wouter
    [J]. AIAA Journal, 2021, 59 (07): : 2558 - 2577
  • [9] Numerical Analysis of Airfoil Trailing-Edge Noise for Straight and Serrated Edges at Incidence
    Romani, Gianluca
    Casalino, Damiano
    van der Velden, Wouter
    [J]. AIAA JOURNAL, 2021, 59 (07) : 2558 - 2577
  • [10] Frequency Selection Mechanism of Airfoil Trailing-Edge Noise
    Takagi, Shohei
    Konishi, Yasufumi
    [J]. JOURNAL OF AIRCRAFT, 2010, 47 (04): : 1111 - 1116