System identification of landfill seismic response

Assessment of landfill seismic response necessitates the availability of reliable dynamic material properties. During the past decade, geophysical surveys and computational studies have been conducted to investigate the seismic response of the Operating Industries, Inc. (OII) landfill in Southern California. In this paper, a survey and summary of available research results is presented. In addition, a set of 011 input-output seismic records during six earthquakes is thoroughly analysed. Spectral analyses are conducted to shed light on the landfill dynamic response characteristics. A simple shear beam model is found to be useful in modelling the landfill resonant behaviour. System identification techniques are employed to estimate the landfill stiffness and damping properties. These properties are defined by minimising the difference between computed and recorded acceleration response spectra at the landfill top. The identified stiffness properties are found to be near the lower bound of those documented through geophysical measurements. Identified damping of about 5% (at resonance) is within the range of earlier investigations. Comparisons of the computed and recorded accelerations show: (i) effectiveness of a linear viscous shear beam model in simulating the landfill dynamic behaviour, for the recorded small to moderate levels of dynamic excitation (up to 0.26 g peak lateral acceleration), and (ii) potential of the employed system identification procedure for analysis of input-output seismic motions.