Characterisation of constitutive behaviour of SnAg, SnAgCu and SnPb solder in flip chip joints

被引：68

作者：

Wiese, S ^{[1
]}

Feustel, F ^{[1
]}

Meusel, E ^{[1
]}

机构：

[1] Tech Univ Dresden, Inst Halbleiter & Mikrosyst Tech, D-01062 Dresden, Germany

来源：

SENSORS AND ACTUATORS A-PHYSICAL | 2002年 / 99卷 / 1-2期

关键词：

SnAg; SnAgCu; SnPb; constitutive behaviour; lead-free solder; flip chip;

D O I：

10.1016/S0924-4247(01)00880-9

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The constitutive behaviour of Sn96.5Ag3.5, Sn95.5Ag4Cu0.5 and Sn63Pb37 solder was investigated on ultra small flip chip solder joints (V = 1 X 10(-11) m(3)). In order to run experiments on these small specimens, a micro shear tester has been designed. The tester is optimised to achieve high precision. It is able to record force displacement hysteresis with a resolution of better than 1 mN and 20 nm. for force and displacement measurements, respectively. It was found that the creep behaviour of the lead-free solders exhibit a very high dependence on stress (Sn96.5Ag3.5: n = 11; Sn95.5Ag4Cu0.5: n = 18), while the eutectic SnPb showed a low stress dependence of n = 2. (C) 2002 Elsevier Science B.V All rights reserved.

引用

页码：188 / 193

页数：6

共 50 条

[1] Thermomigration in SnPb composite flip chip solder joints
Huang, AT
Gusak, AM
Tu, KN
Lai, YS
[J]. APPLIED PHYSICS LETTERS, 2006, 88 (14)
[2] Mesomechanical modelling of SnAgCu solder joints in flip chip
Gong, Jicheng
Liu, Changqing
Conway, Paul P.
Silberschmidt, Vadirn V.
[J]. COMPUTATIONAL MATERIALS SCIENCE, 2008, 43 (01) : 199 - 211
[3] A constitutive material model of eutectic SnPb flip chip solder for Ansys®
Wiese, S
Feustel, F
Rzepka, S
Meusel, E
[J]. MICRO MATERIALS, PROCEEDINGS, 2000, : 453 - 456
[4] An Advanced Constitutive Model for SnPb and SnAg Solder Materials
He, Xu
Yao, Yao
[J]. 2014 15TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2014, : 378 - 383
[5] Characterization of the Creep Constitutive Behavior of SnAgCu Solder in Flip Chip Joints from the Indentation Creep Testing
Niu Xiaoyan
Shu Xuefeng
[J]. 2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 156 - 159
[6] Fracture behaviour of flip chip solder joints
Wiese, S
Jakschik, S
Feustel, F
Meusel, E
[J]. 51ST ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2001, : 1299 - 1306
[7] Thermal fatigue modelling for SnAgCu and SnPb solder joints
Dudek, R
Walter, H
Doering, R
Michel, B
[J]. THERMAL AND MECHANICAL SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS, 2004, : 557 - 564
[8] Creep and crack propagation in flip chip SnPb37 solder joints
Wiese, S.
Feustel, F.
Rzepka, S.
Meusel, E.
[J]. Proceedings - Electronic Components and Technology Conference, 1999, : 1015 - 1020
[9] Creep and crack propagation in flip chip SnPb37 solder joints
Wiese, S
Feustel, F
Rzepka, S
Meusel, E
[J]. 49TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE - 1999 PROCEEDINGS, 1999, : 1015 - 1020
[10] A comparative study of the fatigue Behavior of SnAgCu and SnPb solder joints
Kim, IH
Park, TS
Yang, SY
Lee, SB
[J]. ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 : 831 - 836

← 1 2 3 4 5 →