Continuous cooling transformation behaviour of Microalloy steels containing Ti, Nb, Mn and Mo

被引：70
|
作者：
Manohar, PA [1 ]
Chandra, T [1 ]
Killmore, CR [1 ]
机构：
[1] PORT KEMBLA STEEL WORKS,BHP STEEL FLAT PROD DIV,PORT KEMBLA,NSW,AUSTRALIA
来源：
ISIJ INTERNATIONAL | 1996年 / 36卷 / 12期
关键词：
CCT diagrams; dilatometry; thermomechanical processing; microalloyed steels; gamma/alpha transformation kinetics;
D O I：
10.2355/isijinternational.36.1486
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Continuous cooling transformation diagrams are determined for microalloyed steels containing Ti, Nb, Mn and Mo in undeformed as well as in thermomechanically processed conditions using dilatometry. Effects of thermomechanical processing, cooling rate and Nb content on gamma/alpha transformation kinetics are presented. Thermomechanical processing is found to accelerate the onset of gamma/alpha transformation (gamma transformation start temperature, Ar-3, is raised). However, the progress of gamma/alpha transformation is retarded considerably in deformed samples. Increase in cooling rate lowers Ar-3 significantly and accelerates the progress of transformation. Nb lowers Ar-3 undeformed austenite but raises Ar-3 of thermomechanically processed austenite.
引用
收藏
页码：1486 / 1493
页数：8
相关论文
共 50 条
  • [1] THE INTERMEDIATE TRANSFORMATION OF MN-MO-NB STEEL DURING CONTINUOUS COOLING
    LEE, JL
    HON, MH
    CHENG, GH
    JOURNAL OF MATERIALS SCIENCE, 1987, 22 (08) : 2767 - 2777
  • [2] Effects of deformation and Mo, Nb, V, Ti on continuous cooling transformation in Cu-P-Cr-Ni-Mo weathering steels
    Zhang, Chunling
    Cai, Dayong
    Wang, Yuhui
    Liu, Mingqing
    Liao, Bo
    Fan, Yunchang
    MATERIALS CHARACTERIZATION, 2008, 59 (11) : 1638 - 1642
  • [3] Prediction of Ferrite Transformation in Nb-containing Microalloyed Steels during Continuous Cooling
    Yun, Bing
    Sun, Jianzhi
    Sun, Jianlin
    Dong, Xiaolei
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 1137 - +
  • [4] Effect of TMP and Mn content on the CCT behaviour of Ti-Nb-Mo microalloyed steels
    Manohar, PA
    Chandra, T
    THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II, 1997, : 749 - 755
  • [5] Transformation Behavior During Continuous Cooling of Mn-Mo-Nb-B Microalloyed Steel
    Yuan, Shaoqiang
    Liang, Guoli
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 260 - 263
  • [6] Influence of cooling rate on the precipitation behavior in Ti-Nb-Mo microalloyed steels during continuous cooling and relationship to strength
    Bu, F. Z.
    Wang, X. M.
    Chen, L.
    Yang, S. W.
    Shang, C. J.
    Misra, R. D. K.
    MATERIALS CHARACTERIZATION, 2015, 102 : 146 - 155
  • [7] Bainitic transformation in low carbon Mn-Nb-V and Mn-Mo-Nb-V steels
    Cao, Renhuan
    Ma, Hongti
    Yan, Zhenqi
    Jinshu Xuebao/Acta Metallurgica Sinica, 1988, 24 (02):
  • [8] OBSERVATIONS ON VERSATILITY OF MN-MO-NB CONTROLLED-TRANSFORMATION STEELS
    LANDER, HN
    SMITH, YE
    MIHELICH, JL
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1974, 14 (06) : 419 - 424
  • [9] Influence of the prior austenite microstructure on the transformation products obtained for C-Mn-Nb steels after continuous cooling
    Bengochea, R
    López, B
    Gutierrez, I
    ISIJ INTERNATIONAL, 1999, 39 (06) : 583 - 591
  • [10] Effects of N and B on continuous cooling transformation diagrams of Mo-V-Ti micro-alloyed steels
    Wang Yuhui
    Liao Bo
    Liu Ligang
    Li Xianfeng
    Su Hang
    Yang Caifu
    Wang Qingfeng
    PHASE TRANSITIONS, 2012, 85 (05) : 419 - 426
12345