Sintering and characterization of nanophase zinc oxide

被引:93
|
作者
Hynes, AP [1 ]
Doremus, RH
Siegel, RW
机构
[1] Rensselaer Polytech Inst, Dept Mat Sci & Engn, Troy, NY 12180 USA
[2] Rensselaer Polytech Inst, Rensselaer Nanotechnol Ctr, Troy, NY 12180 USA
关键词
D O I
10.1111/j.1151-2916.2002.tb00391.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Nanocrystalline, single-phase undoped ZnO was sintered to 95%-98% of theoretical density at 650degrees-700degreesC, using pressureless isothermal sintering. The density increased very rapidly at 500degrees-600degreesC, remained constant with sintering temperature until similar to900degreesC, and then decreased slightly. The estimated activation energy for densification at 600degrees-700degreesC (275 kJ/mol) was comparable to grain-growth activation energies previously reported for microcrystalline ZnO but much greater than the grain-growth activation energy measured in the present work. A bimodal microstructure, consisting of nanocrystalline grains within larger ensembles ("supergrains"), was observed, and both modes grew as the sintering temperature increased. The grain-growth activation energy for the nanocrystalline grains was extremely low, similar to20 kJ/mol. The activation energy for the growth of the supergrains depended strongly on temperature but was similar to54 kJ/mol at >500degreesC. The important mechanisms probably are rearrangement of the nanoparticle grains, with simultaneous surface and boundary diffusion, and vapor transport above 900degreesC.
引用
收藏
页码:1979 / 1987
页数:9
相关论文
共 50 条
  • [1] Synthesis and characterization of nanophase zinc oxide materials
    Y. Aditya Sumanth
    R. Annie Sujatha
    S. Mahalakshmi
    P. C. Karthika
    S. Nithiyanantham
    S. Saravanan
    M. Azagiri
    [J]. Journal of Materials Science: Materials in Electronics, 2016, 27 : 1616 - 1621
  • [2] Synthesis and characterization of nanophase zinc oxide materials
    Sumanth, Y. Aditya
    Sujatha, R. Annie
    Mahalakshmi, S.
    Karthika, P. C.
    Nithiyanantham, S.
    Saravanan, S.
    Azagiri, M.
    [J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2016, 27 (02) : 1616 - 1621
  • [3] Sintering and characterization of bismuth-oxide-containing zinc oxide varistors
    El-Meliegy, EM
    Saleh, HI
    Selim, M
    [J]. MATERIALS CHARACTERIZATION, 2004, 52 (4-5) : 371 - 378
  • [4] Structural and optical properties of nanophase zinc oxide
    Y. Du
    M.-S. Zhang
    J. Hong
    Y. Shen
    Q. Chen
    Z. Yin
    [J]. Applied Physics A, 2003, 76 : 171 - 176
  • [5] Structural and optical properties of nanophase zinc oxide
    Du, Y
    Zhang, MS
    Hong, J
    Shen, Y
    Chen, Q
    Yin, Z
    [J]. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2003, 76 (02): : 171 - 176
  • [6] SINTERING OF ZINC OXIDE
    GRAY, TJ
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1954, 37 (11) : 534 - 539
  • [7] SINTERING OF ZINC OXIDE
    GUPTA, TK
    COBLE, RL
    [J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1967, 46 (09): : 882 - &
  • [8] SINTERING OF ZINC OXIDE
    NORRIS, LF
    PARRAVANO, G
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1963, 46 (09) : 449 - 452
  • [9] SINTERING REACTIONS OF ZINC OXIDE
    LEE, VJ
    PARRAVANO, G
    [J]. JOURNAL OF APPLIED PHYSICS, 1959, 30 (11) : 1735 - 1740
  • [10] SINTERING STUDIES ON ZINC OXIDE
    DOLLIMORE, D
    SPOONER, P
    [J]. TRANSACTIONS OF THE FARADAY SOCIETY, 1971, 67 (585): : 2750 - +