Calculation of dust lifting by a transient shock wave

被引:21
|
作者
Gosteev, YA [1 ]
Fedorov, AV
机构
[1] Russian Acad Sci, Inst Theoret & Appl Mech, Siberian Div, Novosibirsk 630090, Russia
[2] Novosibirsk State Univ Architecture & Construct, Novosibirsk 630008, Russia
关键词
two-phase flows; shock waves; formation of gas mixtures;
D O I
10.1023/A:1015657904264
中图分类号
O414.1 [热力学];
学科分类号
摘要
A mathematical model of lifting of dust particles under the action of transient shock waves is proposed, which takes into account a simultaneous action of the Saffman force and aerodynamic interference on the particle. This model provides all adequate description of the initial stage of lifting of single particles of a dusty layer under the action of shock waves of weak and moderate strength. Satisfactory agreement of numerical and experimental data is reached. It is shown that particle lifting is caused by the action of the Saffman force in the case of weak shock waves (the shock-wave Mach number is less than 1.5) and medium-sized particles (the particle diameter is less than 100 mum) and aerodynamic interference between the particle and the surface in the case of shock waves of moderate strength (the shock-wave Mach number is 2.1-3.3) and large particles (the particle diameter is 200-250 mum).
引用
收藏
页码:322 / 326
页数:5
相关论文
共 50 条
  • [1] Calculation of Dust Lifting by a Transient Shock Wave
    Yu. A. Gosteev
    A. V. Fedorov
    Combustion, Explosion and Shock Waves, 2002, 38 : 322 - 326
  • [2] Experimental research on dust lifting by propagating shock wave
    P. Żydak
    P. Oleszczak
    R. Klemens
    Shock Waves, 2017, 27 : 179 - 186
  • [3] Experimental research on dust lifting by propagating shock wave
    Zydak, P.
    Oleszczak, P.
    Klemens, R.
    SHOCK WAVES, 2017, 27 (02) : 179 - 186
  • [4] To the calculation of dust rise by a passing shock wave
    Gosteev, Yu.A.
    Fedorov, A.V.
    Fizika Goreniya i Vzryva, 2002, 38 (03): : 80 - 84
  • [5] Modelling of dust lifting process behind propagating shock wave
    Zydak, Przemyslaw
    Klemens, Rudolf
    JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 2007, 20 (4-6) : 417 - 426
  • [6] Calculation Model of Temperature in a Dust Particle after Shock Wave
    Zheng, Bo
    INTERNATIONAL CONFERENCE ON FRONTIERS OF ENERGY, ENVIRONMENTAL MATERIALS AND CIVIL ENGINEERING (FEEMCE 2013), 2013, : 262 - 267
  • [7] Lifting of dust particles behind a reflected shock wave sliding above a particle layer
    S. P. Kiselev
    V. P. Kiselev
    Journal of Applied Mechanics and Technical Physics, 2001, 42 (5) : 741 - 747
  • [8] Computation of dust lifting behind a shock wave sliding along the layer. verification of the model
    Fedorov, AV
    Fedorchenko, IA
    COMBUSTION EXPLOSION AND SHOCK WAVES, 2005, 41 (03) : 336 - 345
  • [9] Computation of Dust Lifting behind a Shock Wave Sliding along the Layer. Verification of the Model
    A. V. Fedorov
    I. A. Fedorchenko
    Combustion, Explosion and Shock Waves, 2005, 41 : 336 - 345
  • [10] The effect of polydispersity on dust lifting behind shock waves
    Ilea, Catalin G.
    Kosinski, Pawel
    Hoffmann, Alex C.
    POWDER TECHNOLOGY, 2009, 196 (02) : 194 - 201