Discontinuous Space Vector PWM Strategy of Neutral-Point-Clamped Three-Level Inverters for Output Current Ripple Reduction

In order to meet the high performance and efficiency requirements, a new space vector-based discontinuous modulation strategy for neutral-point clamped three-level inverter is presented in this paper. Different from the conventional discontinuous PWM (DPWM) strategies, a new clamping state is applied to synthesize the reference voltage under the condition of low modulation index. The rms value of output current ripple for different clamping states are calculated, and then the distribution of the new clamping state and the other two clamping states adopted in conventional DPWMs is optimized based on the calculation results. The switching sequences are redesigned according to the new distribution of the three clamping states. The output voltage and current, switching loss, neutral-point voltage ripple and the common mode voltage of the proposed DPWM strategy and DPWM0-DPWM3 are compared by simulation and experimental results. The results show that by the use of the proposed strategy, the values of total demand distortion of output current (I-TDD) and weighted total harmonic distortion of output voltage (V (WTHD)) are the lowest. Furthermore, the product of switching loss and I-TDD of the proposed strategy maintains the lowest within a large range of modulation index-load angle plane. It can be concluded that the utilization of the new clamping state and optimal distribution of different clamping states could enhance the output performance of the inverter. Moreover, the high-efficiency requirement can also be realized at the same time.