Shear localization in semi-solid deformation: A bifurcation theory approach

被引:8
|
作者
Sheikh-Ansari, M. H. [1 ]
Aghaie-Khafri, M. [1 ]
机构
[1] KN Toosi Univ Technol, Fac Mat Sci & Engn, Tehran 1999143344, Iran
关键词
Granular deformation; Strain localization; Dilatancy; Semi-solid; SYNCHROTRON TOMOGRAPHIC QUANTIFICATION; ALUMINUM-ALLOY; NUMERICAL-SIMULATION; MECHANICAL-BEHAVIOR; GRANULAR-MATERIALS; RAPID COMPRESSION; PLANE DEFORMATION; METALLIC ALLOYS; IN-SITU; PRESSURE;
D O I
10.1016/j.mechrescom.2018.02.002
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Considering the granular nature of the semi-solid deformation, a new criterion for the onset of instability in the semi-solid materials was developed, which is capable of incorporating the thixotropic behavior, Reynold's dilatancy and the internal friction between agglomerates. It is based on the bifurcation theory approach and on the Pan analysis which shows that the onset of instability in rate-dependent materials can be identified on the basis of the rate-independent localization criterion. The localization criterion correlates the critical net hardening modulus to strain hardening as well as to strain rate hardening. The results reveal that the localization is inhibited when the fraction of solid skeleton is lower than a critical value. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 5
页数:5
相关论文
共 50 条
  • [1] A thermodynamic approach to analyze shear localization in semi-solid materials
    Sheikh-Ansari, M. H.
    Aghaie-Khafri, M.
    CONTINUUM MECHANICS AND THERMODYNAMICS, 2018, 30 (04) : 805 - 815
  • [2] A thermodynamic approach to analyze shear localization in semi-solid materials
    M. H. Sheikh-Ansari
    M. Aghaie-Khafri
    Continuum Mechanics and Thermodynamics, 2018, 30 : 805 - 815
  • [3] Predicting flow localization in semi-solid deformation
    M. H. Sheikh Ansari
    M. Aghaie-Khafri
    International Journal of Material Forming, 2018, 11 : 165 - 173
  • [4] Predicting flow localization in semi-solid deformation
    Ansari, M. H. Sheikh
    Aghaie-Khafri, M.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2018, 11 (02) : 165 - 173
  • [5] Localization of shear strain and shear band formation induced by deformation in semi-solid Al-Cu alloys
    Nagira, T.
    Morita, S.
    Yasuda, H.
    Gourlay, C. M.
    Yoshiya, M.
    Sugiyama, A.
    Uesugi, K.
    MCWASP XIV: INTERNATIONAL CONFERENCE ON MODELLING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES, 2015, 84
  • [6] Mechanical Analysis of Semi-solid Metals Shear Deformation during Compression
    Luo, Shoujing
    Chen, Qiang
    Gao, Xiaorong
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES X, 2008, 141-143 : 439 - +
  • [7] An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials
    M. H. Sheikh-Ansari
    M. Aghaie-Khafri
    International Journal of Material Forming, 2019, 12 : 703 - 716
  • [8] An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials
    Sheikh-Ansari, M. H.
    Aghaie-Khafri, M.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2019, 12 (04) : 703 - 716
  • [9] Shear deformation behavior of Al-5% Mg in a semi-solid state
    Himeji Inst of Technology, Hyogo, Japan
    Acta Mater, 18 (6351-6360):
  • [10] Shear deformation behavior of Al-5% Mg in a semi-solid state
    Iwasaki, H
    Imori, T
    Mabuchi, M
    Higashi, K
    ACTA MATERIALIA, 1998, 46 (18) : 6351 - 6360