VALIDATION OF THE DESIGN FORESTRY UNCONVENTIONAL CABLEWAY WITH SIMULATION SOFTWARE MSC.ADAMS

被引：0
|
作者：
Remper, M. [1 ]
机构：
[1] Tech Univ Zvolen, Fac Environm & Mfg Technol, TG Masaryka 24, Zvolen 96053, Slovakia
来源：
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE OF YOUNG SCIENTISTS, COYOUS 2011 | 2011年
关键词：
forestry cableway; spectrum of stress conditions; virtual simulation; MSC.Adams;
D O I：
暂无
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
The paper deals with examining the design being developed unconventional light forestry cableway, for a preliminary verification of the design in real operating conditions. Object monitoring response waveforms charged on forces are bracing arm and in the stage of bringing down the slope in the half tow. The basis of the methodology is application of the real measured forces imported into the virtual-simulation analysis. Analysis set was created in the software system MSC. Adams.
引用
收藏
页码：245 / 252
页数：8
相关论文
共 13 条
  • [1] Smart driver: a research project for closed loop vehicle simulation in MSC.ADAMS
    Frezza, R
    Saccon, A
    Minen, D
    Ortmann, C
    MULTIBODY DYNAMICS: MONITORING AND SIMULATION TECHNIQUES - III, 2004, : 401 - 413
  • [2] Construction of a Parametrized Tracked Vehicle Model and its Simulation in MSC.ADAMS Program
    Nabaglo, Tomasz
    Kowal, Janusz
    Jurkiewicz, Andrzej
    JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, 2013, 32 (1-2): : 167 - 173
  • [3] Formula Student Skid-pad Event Simulation Using MSC.Adams/Car
    Spakauskas, K.
    Lukosevicius, V.
    TRANSPORT MEANS 2013, 2013, : 37 - 41
  • [4] Field test validation of Flex5, MSC.Adams, alaska/Wind and SIMPACK for load calculations on wind turbines
    Zierath, Janos
    Rachholz, Roman
    Woernle, Christoph
    WIND ENERGY, 2016, 19 (07) : 1201 - 1222
  • [5] LOAD CALCULATION ON WIND TURBINES: VALIDATION OF FLEX5, ALASKA/WIND, MSC.ADAMS AND SIMPACK BY MEANS OF FIELD TESTS
    Zierath, Janos
    Rachholz, Roman
    Woernle, Christoph
    Muller, Andreas
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2014, VOL 7, 2014,
  • [6] SIMULATION OF HIGH-RATIO COMPRESSION OF A PARALLELEPIPEDAL DURALUMIN BAR USING THE PARTICLE-BASED METHOD AND MSC.ADAMS SOFWARE
    Arinchev, Sergey V.
    PARTICLE-BASED METHODS III: FUNDAMENTALS AND APPLICATIONS, 2013, : 670 - 680
  • [7] Dynamic Simulation and Optimization of Rhombic Drive Stirling Engine Using MSC ADAMS Software
    Badr, W. S.
    Fanni, M.
    Abdel-Rahman, Ali K.
    Rasoul, S. Abdel
    9TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2015, 2016, 22 : 754 - 761
  • [8] Development and Validation of a Simulation Model of Automotive Suspension System using MSC-ADAMS
    Mitra, Anirban C.
    Fernandes, Elvis
    Nawpute, Kartik
    Sheth, Shreyash
    Kadam, Vaibhav
    Chikhale, Seema J.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 4327 - 4334
  • [9] Robust hardware-software Co-simulation framework for design and validation of Hybrid Systems
    Sood, Surinder
    Malik, Avinash
    Roop, Partha
    2022 20TH ACM-IEEE INTERNATIONAL CONFERENCE ON FORMAL METHODS AND MODELS FOR SYSTEM DESIGN (MEMOCODE), 2022,
  • [10] Design of slip-based traction control system for EV and validation using co-simulation between Adams and Matlab/Simulink
    Saha, Sudipta
    Amrr, Syed Muhammad
    SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL, 2020, 96 (06): : 537 - 549
12