Evaluation of microstructure and mechanical properties of magnesium alloys by stir casting process

被引：0
|
作者：
Rose, A. Razal [1 ]
Samuel, R. Harris [1 ]
Makawana, Tirth [1 ]
Makawana, Raj [1 ]
Pal, Somnath [1 ]
机构：
[1] SRM Inst Sci & Technol, Dept Mech Engn, Kattankulathur, Tamil Nadu, India
来源：
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6 | 2020年 / 912卷
关键词：
D O I：
10.1088/1757-899X/912/3/032065
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Magnesium alloys are light metal for weight reduction without compromising its overall strength to weight ratio. Mg Alloys containing Zinc, Manganese and Aluminum were found to be suitable for automobile and aerospace applications and is also cheaper to produce. Aluminum improves cast ability. Stir casting is one of the most economical processes suitable for the production of metal alloys due to its simplicity. Zinc contributes towards improvement of strength at ambient temperatures. Manganese offers corrosion resistance, but has low solubility. Change in composition of an alloy could change its properties, depending on the property imparted by the metal. In this paper, the detailed characterization of magnesium alloys was analyzed and results showed that there is a significant improvement in mechanical and metallurgical properties in novel magnesium alloys.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties
    Brabazon, D
    Browne, DJ
    Carr, AJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 326 (02): : 370 - 381
  • [2] Mechanical properties and microstructure of magnesium alloys composites fabricated by casting
    Sasaki, G
    Yoshida, M
    Pan, J
    Fuyama, N
    Fujii, T
    Fukunaga, H
    MAGNESIUM ALLOYS 2000, 2000, 350-3 : 215 - 220
  • [3] Mechanical properties and microstructure of magnesium alloys composites fabricated by casting
    Sasaki, G.
    Yoshida, M.
    Pan, J.
    Fuyama, N.
    Fujii, T.
    Fukunaga, H.
    Materials Science Forum, 2000, 350 : 215 - 220
  • [4] MICROSTRUCTURE AND PROPERTIES OF FRICTION STIR BUTT-WELDED MAGNESIUM CASTING ALLOYS
    Miara, D.
    Pietras, A.
    Mroczka, K.
    ARCHIVES OF METALLURGY AND MATERIALS, 2011, 56 (03) : 749 - 758
  • [5] Synthesis, Microstructure And Mechanical Properties Of Magnesium Matrix Composites Fabricated By Stir Casting
    Meher, Arabinda
    Mahapatra, Manas Mohan
    Samal, Priyaranjan
    Vundavilli, Pandu R.
    Madavan, S. P.
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 4034 - 4041
  • [6] THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM ALLOYS Mg-Li-RE AFTER THE PROCESS OF CASTING AND EXTRUSION
    Bednarczyk, I
    Kuc, D.
    Mikuszewski, T.
    ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (01) : 35 - 38
  • [7] A Review: Effect of Friction Stir Welding on Microstructure and Mechanical Properties of Magnesium Alloys
    Li, Yajie
    Qin, Fengming
    Liu, Cuirong
    Wu, Zhisheng
    METALS, 2017, 7 (12):
  • [8] Evaluation of the microstructure and mechanical properties of MRI202 alloy/SiC composites by the stir casting process
    Martins, R. S.
    Zimpel, I.
    De Barcellos, V. K.
    MATERIALS TODAY COMMUNICATIONS, 2025, 43
  • [9] THE INFLUENCE OF EXTRUSION PROCESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM ALLOYS
    Bednarczyk, I.
    Kuc, D.
    Tomaszewska, A.
    Mrugala, A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (02) : 545 - 550
  • [10] Evaluation of Microstructure, Mechanical Properties and Corrosion Resistance of Friction Stir-Welded Aluminum and Magnesium Dissimilar Alloys
    Verma, Jagesvar
    Taiwade, Ravindra V.
    Sapate, Sanjay G.
    Patil, Awanikumar P.
    Dhoble, Ashwinkumar S.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (10) : 4738 - 4747
12345