Effect of Cold Rolling Strip Edge Offset on Original Shape Signal

被引：0
|
作者：
Yang, Lipo [1 ]
Yu, Bingqiang [1 ]
机构：
[1] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Hebei, Peoples R China
来源：
MATERIALS PROCESSING AND MANUFACTURING III, PTS 1-4 | 2013年 / 753-755卷
关键词：
shape detection; shape signal; edge error compensation; strip offset; cold rolling strip;
D O I：
10.4028/www.scientific.net/AMR.753-755.2794
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To solve the problem that two sides of strip usually cannot cover the shape measurement channel completely, an online compensatory model of error signal used for strip edge is established. Based on this model, the channel coverage of edge is able to be automatically calculated by the horizontal offset. Then, by combining proportion compensation with slope compensation, the signal error of edge shape should be compensated reasonably. This method is proved to be effective and reliable after the physical and industrial tests.
引用
收藏
页码：2794 / 2797
页数：4
相关论文
共 50 条
  • [1] Detection and evalution mechanism of cold rolling strip edge shape
    Yang, L.
    Yu, H.
    Li, R.
    Yuan, W.
    [J]. IRONMAKING & STEELMAKING, 2018, 45 (05) : 457 - 468
  • [2] Wrapping Angle Compensation Model of Cold Rolling Strip Shape Signal
    Yang Lipo
    Yu Bingqiang
    [J]. APPLIED MECHANICS AND MATERIALS I, PTS 1-3, 2013, 275-277 : 693 - 696
  • [3] Analysis of Strip Shape in Cold Rolling of Thin Strip
    Jiang, Z. Y.
    [J]. MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 2980 - 2985
  • [4] Shape detecting and shape control of cold rolling strip
    Yang, Lipo
    Yu, Bingqiang
    [J]. ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 : 902 - 905
  • [5] Strip edge cracking simulation in cold rolling
    Hubert, C.
    Dubar, L.
    Dubar, M.
    Dubois, A.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 551 - 556
  • [6] CONTROL OF STRIP SHAPE DURING COLD ROLLING
    WISTREIC.JG
    [J]. JOURNAL OF THE IRON AND STEEL INSTITUTE, 1968, 206 : 1203 - &
  • [7] Strip Shape Analysis of Asymmetrical Cold Rolling of Thin Strip
    Jiang, Zhengyi
    Du, Xiaozhong
    Du, Yanbing
    Wei, Dongbin
    Hay, Matthew
    [J]. MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 81 - 84
  • [8] EXPERIMENTS TO CONTROL SHAPE IN COLD STRIP ROLLING
    PAWELSKI, O
    SCHULER, V
    [J]. STAHL UND EISEN, 1970, 90 (22): : 1214 - &
  • [9] Modeling of Strip Shape during Cold Rolling of Thin Strip
    Jiang, Zhengyi
    Du, X. Z.
    Du, Y. B.
    Wei, D. B.
    Hay, M.
    [J]. ADVANCES IN MATERIALS PROCESSING IX, 2010, 443 : 9 - +
  • [10] Online shape signal compensation technology of cold rolling strip and its industry application
    National Engineering Research Center for Equipment and Technology of Cold Rolling Strip, Yanshan University, Qinhuangdao 066004, China
    不详
    不详
    [J]. Jixie Gongcheng Xuebao, 12 (56-61):
12345