Production of textile reinforced thermoplastic profiles by roll forming

被引：19
|
作者：
Henninger, F [1 ]
Friedrich, K [1 ]
机构：
[1] Univ Kaiserslautern, IVW, Inst Verbundwerkstoffe GmbH, D-67663 Kaiserslautern, Germany
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2004年 / 35卷 / 05期
关键词：
laminates; fabrics/textiles; roll forming;
D O I：
10.1016/j.compositesa.2003.12.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Roll forming of steel profiles is widely used in various industries due to its productivity and versatility. By adopting this technology to be used with continuous fibre reinforced thermoplastic composites, structurally efficient, long profiles, which possess all the performance advantages inherent to thermoplastic composites, can be manufactured in an economically efficient manner. Glass fibre textile reinforced polypropylene (GF/PP) and polyamide 6.6 (GF/PA66) sheets were successfully formed into top-hat-sections at speeds of up to 10 m/min. The influence of essential processing parameters on the forming behaviour and quality of the profiles was examined experimentally. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：573 / 583
页数：11
相关论文
共 50 条
  • [1] Analysis of roll forming continuous fibre-reinforced thermoplastic sheets
    Bhattacharyya, D
    Dykes, RJ
    Hunter, PJ
    PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLOW PROCESSES IN COMPOSITE MATERIALS, 1999, : 235 - 256
  • [2] Roll forming continuous fibre-reinforced thermoplastic sheets: experimental analysis
    Dykes, RJ
    Mander, SJ
    Bhattacharyya, D
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (12) : 1395 - 1407
  • [3] Friction in Textile Thermoplastic Composites Forming
    Akkerman, R.
    Ten Thije, R.
    Sachs, U.
    De Rooij, M.
    RECENT ADVANCES IN TEXTILE COMPOSITES, 2010, : 271 - +
  • [4] Influence of the sheet forming technique on the drapability of low cost textile reinforced thermoplastic composites
    Baeten, S
    Verpoest, I
    PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON FLOW PROCESSES IN COMPOSITE MATERIALS, 1999, : 355 - 364
  • [5] Roll forming of branched profiles
    Goertan, Mehmet Okan
    Vucic, Dragoslav
    Groche, Peter
    Livatyali, Haydar
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (17) : 5837 - 5844
  • [6] An overview of textile fibre - Reinforced thermoplastic composites
    Ganesan, P.
    Hariharan, S.
    Ramachandran, T.
    Journal of the Institution of Engineers (India), Part TX: Textile Engineering Division, 2009, 90 (AUG.): : 11 - 16
  • [7] Forming simulation of a thermoplastic commingled woven textile on a double dome
    A. Willems
    S. V. Lomov
    I. Verpoest
    D. Vandepitte
    P. Harrison
    W. R. Yu
    International Journal of Material Forming, 2008, 1 : 965 - 968
  • [8] Forming simulation of a thermoplastic commingled woven textile on a double dome
    Willems, A.
    Lomov, S. V.
    Verpoest, I.
    Vandepitte, D.
    Harrison, P.
    Yu, W. R.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 965 - 968
  • [9] Stamp forming of fabric-reinforced thermoplastic composites
    Hou, M
    POLYMER COMPOSITES, 1996, 17 (04) : 596 - 603
  • [10] Variotherm processes in the consolidation of textile strengthened thermoplastic hollow profiles
    Großmann, Knut
    Mühl, Andreas
    Rehn, Steffen
    ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2009, 104 (04): : 242 - 247
12345