Fully bonded internal-tin, niobium-tin (Nb3Sn) conductor development at Oxford superconducting technology

被引：8
|
作者：
McKinnell, JC
Hentges, R
Tatum, J
Zhang, YZ
Hong, S
机构：
[1] Oxford Superconducting Technology, Carteret
来源：
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 1997年 / 7卷 / 02期
关键词：
D O I：
10.1109/77.620822
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Niobium-tin conductors are the class of conductors which allow the fabrication of superconducting magnets that generate over 9 T at 4.2 K and 12 T at 1.8 K. Oxford Superconducting Technology makes a wide range of niobium-tin conductors, One such conductor is a fully bonded internal tin, Nb3Sn composite, The process for the manufacture of the fully bonded Nb3Sn conductor is described, The process is applicable to conductors for high current applications and applications requiring low AC losses. Results for both classes of conductors are reported.
引用
收藏
页码：1360 / 1363
页数：4
相关论文
共 50 条
  • [1] Fully bonded internal-tin, niobium-tin (Nb3Sn) conductor development at Oxford Superconducting Technology
    Oxford Superconducting Technology, Carteret, United States
    IEEE Transactions on Applied Superconductivity, 1997, 7 (2 pt 2): : 1360 - 1363
  • [2] Development of Single-Stacked Internal-Tin Nb3Sn Superconducting Wire
    Ohata, Katsumi
    Miyashita, Katsumi
    Wadayama, Yoshihide
    Kimura, Morio
    Nakagawa, Kazuhiko
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2012, 22 (03)
  • [3] Improvements in the properties of internal-tin Nb3Sn
    Gregory, E
    Gulko, EA
    Pyon, T
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1997, 7 (02) : 1498 - 1503
  • [4] Development of Nb3Sn wires made by the internal-tin process
    Gregory, E
    Gulko, E
    Pyon, T
    ADVANCES IN CRYOGENIC ENGINEERING MATERIALS, VOL 44, PTS A AND B, 1998, 44 : 903 - 909
  • [5] Microstructural investigation of internal-tin Nb3Sn strands
    Peng, X
    Sumption, MD
    Tomsic, M
    Gregory, E
    Collings, EW
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 3422 - 3425
  • [6] Superconducting properties of internal-tin Nb3Sn wire with enhanced current capacity
    Pantsyrnyi, V
    Shikov, A
    Vorobieva, A
    Soudiev, S
    Silaev, A
    Kozlenkova, N
    Beliakov, N
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2001, 11 (01) : 3591 - 3594
  • [7] Experimental and theoretical investigation of the diffusion of Sn in internal-tin Nb3Sn
    Dhaka, Rakesh K.
    Sumption, Michael D.
    Peng, Xuan
    Gregory, Eric
    Tomsic, Michael
    Collings, Edward W.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 2655 - 2659
  • [8] Prototype Nb3Sn Superconducting Strand for ITER CS Coil Conductor Produced in Korea Using the Internal-Tin Route
    Kwon, Soun
    Sim, Ki-Hong
    Ma, Young
    Park, Soo-Hyeon
    Park, Pyeong-Yeol
    Shin, Ik-Sang
    Choi, Heekyung
    Seo, Young-Ho
    Jang, Kyeong-Ho
    Park, Wonwoo
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2015, 25 (03)
  • [9] Importance of heat-treatments for the microstructure and superconducting properties of internal-tin Nb3Sn
    Taillard, R
    Verwaerde, C
    Bruzek, CE
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 3: SURFACE ENGINEERING AND FUNCTIONAL MATERIALS, 1997, : 447 - 450
  • [10] The introduction of titanium into internal-tin Nb3Sn by a variety of procedures
    Gregory, E
    Tomsic, M
    Sumption, MD
    Peng, X
    Wu, X
    Collings, EW
    Zeitlin, BA
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 3478 - 3481
12345