High performance electrodes for reduced temperature solid oxide fuel cells with doped lanthanum gallate electrolyte I. Ni-SDC cermet anode

A Ni-samaria-doped ceria (SD(7) cermet was selected as the anode material for reduced temperature (800 degrees C) solid oxide fuel cells. The NiO-SDC composite powder, synthesized by spray pyrolysis, was employed as the starting anode powder in this study. The influence of Ni content in Ni-SDC cermets on the electrode performance was investigated in order to create the most suitable microstructures. It was found that anodic polarization was strongly influenced by the Ni content in Ni-SDC cermets. The best results were obtained for anode cermets with Ni content of around SO vol.%; anodic polarization was about 30 mV at a current density of 300 mA/cm(2). This high performance seems to be attributable to the microstructure, in which Ni grains form a skeleton with well-connected SDC grains finely distributed over the Ni grains surfaces; such microstructure was also conducive to high stability of the anode. (C) 2000 Elsevier Science S.A. All rights reserved.