Effect of mechanical alloying and sintering on Ni-Ti powders

被引：37

作者：

Sadrnezhaad, SK ^{[1
]}

Selahi, AR ^{[1
]}

机构：

[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran 11365, Iran

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2004年 / 19卷 / 03期

关键词：

mechanical alloying; Ni-Ti; powder; amorphization; intermetallic compounds; sintering; nitinol; milling;

D O I：

10.1081/AMP-120038656

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Commercially pure nickel-titanium powders were mechanically milled in a vertical attritor mill under protective atmosphere for various times from 10 to 24 hr. Products were then compacted and sintered at different temperatures for different times. Amorphization and interatomic phase formation were determined by X-ray diffractometry, scanning electron microscopy, and differential scanning calorimetry. Porosity, virtual density, transition temperatures, and the amount of Ni3Ti first increased and then decreased with the milling time. Presence of oxygen in the milling atmosphere showed partial crystallization of NiTi intermetallic compound accompanied by titanium oxide formation.

引用

页码：475 / 486

页数：12

共 50 条

[1] THE SYNTHESIS OF AMORPHOUS NI-TI ALLOY POWDERS BY MECHANICAL ALLOYING
SCHWARZ, RB
PETRICH, RR
SAW, CK
[J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 1985, 76 (2-3) : 281 - 302
[2] FORMATION AND CRYSTALLIZATION OF AMORPHOUS NI-TI POWDERS PREPARED BY MECHANICAL ALLOYING
BATTEZZATI, L
ENZO, S
SCHIFFINI, L
COCCO, G
[J]. JOURNAL OF THE LESS-COMMON METALS, 1988, 145 (1-2): : 301 - 308
[3] Synthesis of Amorphous/Nanocrystalline Ni-Ti Biomaterial Powders by Mechanical Alloying
Salehi, M.
Verdian, M. M.
Raeissi, K.
[J]. TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL III, 2012, : 1704 - 1708
[4] Synthesis and Characterization of Nanocrystalline Ni-Ti and Ni-Cr Powders by Mechanical Alloying
Shenqi CHEN
Yanchun ZHOU
Yiyi LI (Institute of Metal Research
[J]. Journal of Materials Science & Technology, 1997, (02) : 86 - 90
[5] Synthesis and characterization of nanocrystalline Ni-Ti and Ni-Cr powders by mechanical alloying
Chen, SQ
Zhou, YC
Li, YY
He, SH
[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 1997, 13 (02) : 86 - 90
[6] SYNTHESIS OF AMORPHOUS/NANOCRYSTALLINE Ni-Ti POWDERS BY USING LOW ENERGY MECHANICAL ALLOYING
Verdian, M. M.
Salehi, M.
Raeissi, K.
[J]. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (10): : 1261 - 1269
[7] Research on mechanical alloying and sintering of TiC/Ti powders
Sun Jinfeng
[J]. 金刚石与磨料磨具工程, 2008, (S1) : 168 - 171
[8] FORMATION OF AMORPHOUS Ni-Ti ALLOY BY MECHANICAL ALLOYING
Liang Guoxian
Wang Erde
Li Zhiming(College of Materials Science and Engineering
[J]. Transactions of Nonferrous Metals Society of China, 1994, (04) : 83 - 86+90
[9] THE STRUCTURE OF AMORPHOUS NI-TI ALLOYS PREPARED BY MECHANICAL ALLOYING
BOLDRICK, MS
LEE, D
WAGNER, CNJ
[J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 1988, 106 (1-3) : 60 - 65
[10] CALORIMETRY STUDY OF THE SYNTHESIS OF AMORPHOUS NI-TI ALLOYS BY MECHANICAL ALLOYING
SCHWARZ, RB
PETRICH, RR
[J]. JOURNAL OF THE LESS-COMMON METALS, 1988, 140 : 171 - 184

← 1 2 3 4 5 →