Temperature influence on the physicochemical surface properties and adhesion behaviour of Enterococcus faecalis to glass and silicone

The interest in studies on the physicochemical surface properties of bacteria has increased because they are related to the causes of the initial adhesion of microorganisms to biomaterials and the subsequent biofilm formation on indwelling medical devices. The determination of physicochemical parameters such as hydrophobicity or surface tension is usually done at room temperature, not taking into account the real temperature at which bacteria cause infection inside the human body. In this work, the influence of the experimental temperature on the surface physicochemical characteristics and adhesion behaviour of Enterococcus faecalis ATCC29212 to glass and silicone has been studied. Water, formamide and diiodomethane contact angles on bacterial lawns changed when the experimental temperature was increased from 22degreesC to 37degreesC. Moreover, hydrophobicity, as determined by water contact angle, increases with temperature, in agreement with the higher and lower adhesion to silicone and glass, respectively, observed at 37degreesC, with respect to the results at 22degreesC. Also, when the formamide and diiodomethane contact angles are considered, the changes in the adhesion behaviour to glass and silicone are predicted by the sum of Lifshitz-van der Waals and acid-base interaction free energies if the measurement temperature is the same as the bacterial growth temperature, i.e. 37degreesC.