Nonintrusive disaggregation of residential air-conditioning loads from sub-hourly smart meter data

The installation of smart meters has provided an opportunity to better analyze residential energy consumption and energy-related behaviors. Air-conditioning (A/C) use can be determined through non-intrusive load monitoring, which separates A/C cooling energy consumption from whole-house energy data. In this paper, a disaggregation technique is described and executed on 1-mM smart meter data from 88 houses in Austin, TX, USA, from July 2012 through June 2013. Nineteen houses were sub-metered to validate the accuracy of the disaggregation technique. The R-2 value between the predicted and actual A/C energy use for the 19 houses was 0.90. The algorithm was then applied to all houses. On average, daily energy use from A/C increased by 25 +/- 11 kWh between a mild temperature day of 15.5 degrees C (60 degrees F) and a hotter day of 31.5 degrees C (89 degrees F), with an 11 kWh increase just during peak hours (14:00-20:00). Average time operated, number of cycles, and A/C fraction of energy were found to increase linearly with outdoor temperature up to 25 degrees C (77 degrees F); a plateau was detected at higher temperatures. The accuracy of A/C disaggregation on 5-min data was found to be comparable to 1-min data. However, 15-min data did not yield accurate results due to insufficient granularity. (C) 2014 Elsevier B.V. All rights reserved.