Workpiece surface integrity when slot milling γ-TiAl intermetallic alloy

被引：35
|
作者：
Hood, Richard [1 ]
Aspinwall, David K. [1 ]
Soo, Sein Leung [1 ]
Mantle, Andrew L. [2 ]
Novovic, Donka [3 ]
机构：
[1] Univ Birmingham, Sch Mech Engn, Machining Res Grp, Birmingham, W Midlands, England
[2] Rolls Royce Plc, Mfg Technol, Derby, England
[3] Rolls Royce Plc, Turbines, Derby, England
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2014年 / 63卷 / 01期
关键词：
Titanium; Surface integrity; Slot milling; TITANIUM ALUMINIDE;
D O I：
10.1016/j.cirp.2014.03.071
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Slot milling is presented as a potential manufacturing route for aerospace component feature production when machining gamma-TiAl intermetallic alloy Ti-45Al-2Mn-2Nb + 0.8 vol.% TiB2XD using 2 mm diameter AlTiN coated WC ball nose end milling cutters. When operating with flood cutting fluid at v = 88 m/min, f = 0.05 mm/tooth, d = 0.2 mm, maximum flank wear was similar to 65 mu m after 25 min. SEM micrographs of slot surfaces show re-deposited/adhered and smeared workpiece material to a length of similar to 50 mu m. Brittle fracture of the slot edges was restricted to <10 mu m with sporadic top burr formation observed up to 20 mu m. Cross sectional micrographs of the slot sidewalls showed bending of the lamellae limited to within 5 mu m. (C) 2014 CIRP.
引用
收藏
页码：53 / 56
页数：4
相关论文
共 50 条
  • [1] Workpiece surface integrity when milling Udimet 720 superalloy
    Hood, R.
    Morris, J.
    Soo, S. L.
    3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, 45 : 283 - 286
  • [2] Comparative study on machinability and surface integrity of γ-TiAl alloy in laser assisted milling
    Chi, Yada
    Dong, Zexuan
    Cui, Minchao
    Shan, Chenwei
    Xiong, Yifeng
    Zhang, Dinghua
    Luo, Ming
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 3743 - 3755
  • [3] Drilling and milling of intermetallic γ-TiAl
    Biermann, Dirk
    Bergmann, Stefan
    TMS 2008 ANNUAL MEETING SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2008, : 137 - 147
  • [4] Research on production of microgroove arrays on TiAl intermetallic alloy by micro milling
    Xia, Hongjun
    Zhao, Guolong
    Zhang, Yang
    Li, Liang
    He, Ning
    Hansen, Hans Norgaard
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024,
  • [5] Cutting temperatures when ball nose end milling γ-TiAl intermetallic alloys
    Aspinwall, David K.
    Mantle, Andrew L.
    Chan, Wai Kok
    Hood, Richard
    Soo, Sein Leung
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2013, 62 (01) : 75 - 78
  • [6] Tool wear and surface quality in milling of a gamma-TiAl intermetallic
    Priarone, Paolo Claudio
    Rizzuti, Stefania
    Rotella, Giovanna
    Settineri, Luca
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 61 (1-4): : 25 - 33
  • [7] Milling of gamma TiAl intermetallic alloys
    Beranoagirre, A.
    Lopez de Lacalle, L. N.
    THIRD MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE: MESIC-09, 2009, 1181 : 43 - +
  • [8] Tool wear and surface quality in milling of a gamma-TiAl intermetallic
    Paolo Claudio Priarone
    Stefania Rizzuti
    Giovanna Rotella
    Luca Settineri
    The International Journal of Advanced Manufacturing Technology, 2012, 61 : 25 - 33
  • [9] Intermetallic alloy γ-TiAl brazing
    Khorunov, V. F.
    Maksymova, S. V.
    BRAZING AND SOLDERING, PROCEEDINGS, 2006, : 288 - 292
  • [10] Laser surface remelting and laser surface gas alloying of an intermetallic TiAl alloy
    Weisheit, A
    Mordike, BL
    Smarlsy, W
    Richter, KH
    LASERS IN ENGINEERING, 2000, 10 (01) : 63 - 81
12345