Improvement of Microstructural and Mechanical Characteristics of Friction Stir Welded AA6061 Aluminium Alloy Joint

被引：2
|
作者：
Shehabeldeen, Taher A. [1 ,2 ,3 ]
Mahmoud, T. S. [2 ]
Nemat-Alla, Mahmoud [3 ]
Elkady, E. Y. [2 ]
Yin, Yajun [1 ]
Ji, Xiaoyuan [1 ]
Shen, Xu [1 ]
Zhou, Jianxin [1 ]
机构：
[1] Huazhong Univ Sci & Technol, State Key Lab Mat Proc & Die & Mould Technol, Wuhan 430047, Peoples R China
[2] Benha Univ, Fac Engn Shoubra, Mech Engn Dept, Banha, Egypt
[3] Kafrelsheikh Univ, Fac Engn, Dept Mech Engn, Kafrelsheikh 33516, Egypt
来源：
2019 5TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AERONAUTICAL ENGINEERING (ICMAE 2019) | 2020年 / 751卷
关键词：
Friction Stir Welding; dissimilar alloys; AA6061 Aluminum Alloy; Mechanical Characteristics; Microstructure; WELDING PROCESS; TOOL; MAGNESIUM;
D O I：
10.1088/1757-899X/751/1/012088
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
To improve mechanical characteristics of friction stir welded joint made of AA6061-T6, AA2024 was used as a filler material due to its high strength and compatibility with AA6061 aluminium alloy. Different filler strip thickness (1, 1.5, and 2 mm) were investigated. Homogenous plastic deformation of the mixture with soft and refined grains was observed in the stir zone due to dynamic recrystallization of the grains. Friction stir welded joints with filler strip showed high hardness and tensile strength compared with filler-free joints. Welded joint with 1 mm filler strip has the highest tensile strength among other joints due to the dynamic recrystallization of the refined grains as a result of heat concentration. In addition, using greater thickness of filler strips makes the joining process more difficult, causes joint defects and reduces the tensile strength of welded joints.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Mechanical Properties and Microstructural Characterization of Dissimilar Friction Stir Welded AA5083 and AA6061 Aluminium Alloys
    Rajaseelan, Sasi Lakshmikhanth
    Kumarasamy, Subbaiah
    [J]. MECHANIKA, 2020, 26 (06): : 545 - 552
  • [2] Mechanical properties and microstructural characterization of dissimilar friction stir welded AA5083 and AA6061 aluminium alloys
    Rajaseelan, Sasi Lakshmikhanth
    Kumarasamy, Subbaiah
    [J]. Mechanika, 2020, 26 (06): : 545 - 552
  • [3] Microstructural, Mechanical and Wear Properties of Friction Stir Welded AA6061/AlNp Composite Joints
    Kumar, B. Ashok
    Dinaharan, I
    Murugan, N.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (01) : 651 - 666
  • [4] Microstructural, Mechanical and Wear Properties of Friction Stir Welded AA6061/AlNp Composite Joints
    B. Ashok Kumar
    I. Dinaharan
    N. Murugan
    [J]. Journal of Materials Engineering and Performance, 2022, 31 : 651 - 666
  • [5] Tribological behavior of friction stir processed AA6061 aluminium alloy
    Shaik, Dilkush
    Sudhakar, I
    Bharat, G. C. S. G.
    Varshini, V.
    Vikas, S.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 860 - 864
  • [6] Predicting tensile strength of friction stir welded AA6061 aluminium alloy joints by a mathematical model
    Elangovan, K.
    Balasubramanian, V.
    Babu, S.
    [J]. MATERIALS & DESIGN, 2009, 30 (01) : 188 - 193
  • [7] Mechanical and Microstructural Characterization of Friction Stir Welded SiC and B4C Reinforced Aluminium Alloy AA6061 Metal Matrix Composites
    Ali, Kaveripakkam Suban Ashraff
    Mohanavel, Vinayagam
    Vendan, Subbiah Arungalai
    Ravichandran, Manickam
    Yadav, Anshul
    Gucwa, Marek
    Winczek, Jerzy
    [J]. MATERIALS, 2021, 14 (11)
  • [8] Effect of tool pin profile and tool rotational speed on mechanical properties of Friction Stir Welded AA6061 aluminium alloy
    Elangovan, K.
    Balasubramanian, V.
    Valliappan, M.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (3-4) : 251 - 260
  • [9] On lap shear strength of friction stir spot welded AA6061 alloy
    Garg, Ashu
    Bhattacharya, Anirban
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2017, 26 : 203 - 215
  • [10] Friction stir welding parameters and their influence on mechanical properties of welded AA6061 and AA5052 aluminium plates
    Sindhuja, M.
    Neelakrishnan, S.
    Davidson, Benjamin Shiloh
    [J]. MATERIALS RESEARCH EXPRESS, 2021, 8 (10)
12345