Application of alcohol based spraying coating on green sand mould for steel casting

被引：0
|
作者：
Xu, Z. L. [1 ]
Wang, J. [2 ]
Yang, S. S. [2 ]
He, Q. L. [2 ]
Xiong, H. Sh [2 ]
机构：
[1] Wuhan Text Univ, Wuhan 430073, Peoples R China
[2] CSR Yangtze Co Ltd, Tongling Branch, Tongling 244000, Anhui, Peoples R China
来源：
4TH GLOBAL CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING (CMSE 2015) | 2015年 / 103卷
关键词：
D O I：
10.1088/1757-899X/103/1/012012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A kind of coating suitable for green sand steel casting was developed. Thepractical application showed that the strength of the coating was high enough with no crack and no peeling under room temperature after drying the spraying coating, the performance of the coating for anti-cracking was good under high temperature, and the gas evolution of the coating was low. Using the coating, the casting surfaces finish appearedvery good.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Green Compression Strength of Tin Mine Tailing Sand for Green Sand Casting Mould
    Abdullah, Azhar
    Sulaiman, Shamsuddin
    Baharudin, B. T. Hang Tuah
    Ariffin, Mohd Khairol Anuar Mohd
    Vijayaram, Thoguluva Raghvan
    [J]. PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 2013, 21 (02): : 335 - 341
  • [2] Utilization of Local Riverbed Sand in Green Sand Mould Casting-A Study
    Sadarang, Jatin
    Nayak, Ramesh Kumar
    Panigrahi, Isham
    [J]. ADVANCEMENT IN MATERIALS, MANUFACTURING AND ENERGY ENGINEERING, VOL. II, ICAMME 2021, 2022, : 431 - 438
  • [3] Laser sintering of silica sand - Mechanism and application to sand casting mould
    Wang, XH
    Fuh, JYH
    Wong, YS
    Tang, YX
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 21 (12): : 1015 - 1020
  • [4] Laser Sintering of Silica Sand – Mechanism and Application to Sand Casting Mould
    X. H. Wang
    J. Y. H. Fuh
    Y. S. Wong
    Y. X. Tang
    [J]. The International Journal of Advanced Manufacturing Technology, 2003, 21 : 1015 - 1020
  • [5] Effect of mould expansion on pattern allowances in sand casting of steel
    Peters, F.
    Voigt, R.
    Ou, S. Z.
    Beckermann, C.
    [J]. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2007, 20 (05) : 275 - 287
  • [6] Ferrochrome Slag as an Alternative Mould Material for Green Sand Mould Casting-A Study
    Sadarang, Jatin
    Nayak, Ramesh Kumar
    Panigrahi, Isham
    [J]. ADVANCEMENT IN MATERIALS, MANUFACTURING AND ENERGY ENGINEERING, VOL. II, ICAMME 2021, 2022, : 439 - 447
  • [7] Utilization of fly ash as an alternative to silica sand for green sand mould casting process
    Sadarang, Jatin
    Nayak, Ramesh Kumar
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2021, 68 : 1553 - 1561
  • [8] A combinatorial approach to optimize the properties of green sand used in casting mould
    Shilpa, M.
    Prakash, G. S.
    Shivakumar, M. R.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1509 - 1514
  • [9] Challenges and Future Prospective of Alternative Materials to Silica Sand for Green Sand Mould Casting: A Review
    Jain Sadarang
    Ramesh Kumar Nayak
    Ishim Panigrahi
    [J]. Transactions of the Indian Institute of Metals, 2021, 74 : 2939 - 2952
  • [10] Challenges and Future Prospective of Alternative Materials to Silica Sand for Green Sand Mould Casting: A Review
    Sadarang, Jain
    Nayak, Ramesh Kumar
    Panigrahi, Ishim
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (12) : 2939 - 2952
12345