Statistical analysis of mechanical properties on the example of aggregates of Carpathian sandstones

The constantly growing, broadly understood, construction industry requires the use of a large amount of aggregates. The construction of roads, motorways, railway lines and hydrotechnical structures requires the use of aggregates of high quality, which is primarily determined by mechanical properties. The basic parameters describing mechanical properties of aggregates are the Los Angeles (LA) fragmentation resistance coefficient and the Micro-Deval (M DE) abrasion resistance coefficient. The LA and M DE coefficients depend mainly on the type of rock and its physical and mechanical properties. This has been thoroughly researched and documented as evidenced by the abundant literature in the field. However, the correlation between LA and M DE coefficients still gives rise to extensive discussions and some concerns. A number of publications demonstrate dependencies for various types of aggregates. Therefore, research was undertaken to present statistical analysis for one type of aggregate and one geological area. This article presents the results of the fragmentation resistance test in the Los Angeles drum and the abrasion resistance test in the Micro-Deval drum of aggregates from Carpathian sandstone deposits. Aggregate samples were divided into three groups according to the location of the deposits and the tectonic unit from which they originated. The obtained results were subjected to static analysis to fit the best mathematical function describing the relationship between the two parameters.