Study of the parameters of lightweight polymer-cement repair mortars exposed to high temperatures

被引：4
|
作者：
Melichar, Tomas [1 ]
Bydzovsky, Jiri [1 ]
机构：
[1] Brno Univ Technol, Fac Civil Engn, Inst Technol Bldg Mat & Components, Veveri 331-95, Brno 60200, Czech Republic
来源：
ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2 | 2013年 / 395-396卷
关键词：
Mortar; exposition; elevated; temperature; lightweight; aggregate; fibers;
D O I：
10.4028/www.scientific.net/AMM.395-396.429
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The article examines the research aimed at studying the basic physico-mechanical parameters of polymer-cement repair mortars with a modified composition. The objective of a composition modification was to achieve the parameters characteristic of fire-resistant repair mortars. For research purposes, a lightweight sintered aggregate-based ash body was used along with polymer fibres based on polyolefin. It was suggested to use a few recipes that have been subjected to high temperature stress - up to 1200 degrees C. Subsequently the suitability of the formula composition was verified by determining the essential characteristics - visual assessment of the structure, density, compressive strength and flexural strength. The results point to the suitability of the proposed formulas, although this will be verified by setting other essential material characteristics.
引用
收藏
页码：429 / +
页数：2
相关论文
共 50 条
  • [1] Influence of Lowered Temperature on Efficiency of Concrete Repair with Polymer-Cement Repair Mortars
    Wojnowski, Damian
    Francke, Barbara
    Garbacz, Andrzej
    MATERIALS, 2020, 13 (19)
  • [2] Impact of lowered curing temperature on the compressive strength of polymer-cement repair mortars
    Wojnowski, Damian
    Francke, Barbara
    64THSCIENTIFIC CONFERENCE OF THE COMMITTEE FOR CIVIL ENGINEERING OF THE POLISH ACADEMY OF SCIENCES AND THE SCIENCE COMMITTEE OF THE POLISH ASSOCIATION OF CIVIL ENGINEERS (PZITB) (KRYNICA 2018), 2019, 262
  • [3] Polymer-cement mortars for repairing ancient masonries mechanical properties
    Anagnostopoulos, CA
    Anagnostopoulos, AC
    CONSTRUCTION AND BUILDING MATERIALS, 2002, 16 (07) : 379 - 384
  • [4] MODELLING THE INFLUENCE OF COMPOSITION ON RHEOLOGICAL PARAMETERS AND MECHANICAL PROPERTIES OF FIBRE REINFORCED POLYMER-CEMENT MORTARS
    Lyashenko, Tatiana V.
    Kryukovskaya, Svetlana A.
    BRITTLE MATRIX COMPOSITES 10, 2012, : 177 - 186
  • [5] Performance of polymer-modified self-leveling mortars with high polymer-cement ratio for floor finishing
    Do, J
    Soh, Y
    CEMENT AND CONCRETE RESEARCH, 2003, 33 (10) : 1497 - 1505
  • [6] Core-Shell Morphology of Redispersible Powders in Polymer-Cement Waterproof Mortars
    Caimi, Stefano
    Timmerer, Elias
    Banfi, Michela
    Storti, Giuseppe
    Morbidelli, Massimo
    POLYMERS, 2018, 10 (10)
  • [7] Thermal characteristics of high-strength polymer-cement composites with lightweight aggregates and polypropylene fiber
    Won, Jong-Pil
    Kang, Hee-Byoung
    Lee, Su-Jin
    Lee, Sang-Woo
    Kang, Joo-Won
    CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (10) : 3810 - 3819
  • [8] Mechanical and microstructural properties of alkali-activated lightweight mortars exposed to high temperatures
    Saridemir, Mustafa
    Celikten, Serhat
    Ayaydin, Gunay
    JOURNAL OF BUILDING ENGINEERING, 2021, 42
  • [9] THE SUBMICROSTRUCTURE OF HIGH-STRENGTH POLYMER-CEMENT MATERIAL
    ENIKOLOPIAN, NS
    IUDOVICH, BE
    MAMBISH, EI
    VENIDIKTOV, VN
    KRIVOBORODOV, IR
    AGASANDIAN, VA
    DOKLADY AKADEMII NAUK SSSR, 1988, 300 (04): : 883 - 885
  • [10] The role of flame retardants in cement mortars exposed at elevated temperatures
    Pachta, Vasiliki
    Tsardaka, Eirini-Chrysanthi
    Stefanidou, Maria
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 273
12345