Three Dimensional Measurement System for the Dynamic Deformation of Aero-engine Blade Profile

In order to solve the technical problem of three-dimensional profile measurement of aero-engine blades with high speed rotation, an optical dynamic measurement system for aero-engine blades was developed. Firstly, the system is calibrated by the algorithm of spatial truncation phase calibration to establish the index between truncation phase and spatial coordinates. During the measurement, the deformation map of the rotating measured blade is obtained by synchronous projection and snapshot. By using the fast Fourier algorithm, the truncation phase is obtained, and then the profile information of blade can be obtained through the truncation phase and spatial coordinate index. Through the design and construction of the blade simulation platform and dynamic measurement experiment system, the three-dimensional profile data of the blade at different rotating speeds are obtained, compared and analyzed, and then the overall profile deformation law is discovered, which verifies the effectiveness and feasibility of the algorithm. The system can obtain the dynamic profile information of the whole blade completely, and provide innovative technical means for blade design verification and performance analysis.