Hard Cutting and Diamond burnishing of 100Cr6 steel bearings

被引：4
|
作者：
Liska, Janos [1 ]
Liska, Katalin [1 ]
Kodacsy, Janos [1 ]
机构：
[1] Kecskemet Coll, Departure Vehicle Technol, H-6000 Kecskemet, Hungary
来源：
PRECISION MACHINING VII | 2014年 / 581卷
关键词：
Hard Cutting; Diamond Burnishing; MQL; Wiper geometry; Cutting Forces; Surface Roughness;
D O I：
10.4028/www.scientific.net/KEM.581.169
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper deals with research concerning optimal technological parameters in diamond burnishing after hard turning by standard tool geometry and by wiper geometry. Burnishing is a less known method, by which the surface of work-piece is finished by a harder tool, without chip removal. Experiments focus on the surface roughness of work-piece, at combination of feed (f) and burnishing force (F-p). We measured also machining forces (F-c, F-f F-p) at hard turning. Work-piece was made of 100Cr6-type bearing steel with hardness of HRC64.
引用
收藏
页码：169 / 175
页数：7
相关论文
共 50 条
  • [1] Wear Rate of CBN Cutting Tool in Hard Turning of 100Cr6 Bearing Steel
    Raczkoevi, Laszlo
    PRECISION MACHINING VII, 2014, 581 : 50 - 54
  • [2] Influence of Cutting Speed in Turning and Force in Subsequent Diamond Smoothing on Magnetic Properties of Steel 100Cr6
    Maurer, Oliver
    Liborius, Hendrik
    Rauch, Christiane
    Baehre, Dirk
    Schubert, Andreas
    METALS, 2021, 11 (07)
  • [3] Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools
    Benga, GC
    Abrao, AM
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 237 - 241
  • [4] Performance and reliability of rolling bearings made of 100Cr6
    Trojahn, W.
    HTM - Journal of Heat Treatment and Materials, 2002, 57 (03): : 164 - 167
  • [5] 100Cr6
    热处理技术与装备, 2018, (03) : 78 - 78
  • [6] Characterization of thixoforming process of 100Cr6 steel
    K.P.SOLEK
    A.RASSILI
    J.C.PIERRET
    G.VANEETVELD
    Transactions of Nonferrous Metals Society of China, 2010, 20 (S3) : 916 - 920
  • [7] Characterization of thixoforming process of 100Cr6 steel
    Solek, K. P.
    Rassili, A.
    Pierret, J. C.
    Vaneetveld, G.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S916 - S920
  • [8] Specific Cutting Conditions of 100Cr6 Steel Grinding and Selected Final Roughness Parameters
    Naprstkova, Natasa
    Novak, Martin
    Sviantek, Jan
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2020, 14 (02) : 184 - 189
  • [9] Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel
    Kountanya, Raja
    Al-Zkeri, Ibrahim
    Altan, Taylan
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (11) : 5068 - 5076
  • [10] Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts
    Galoppi, Gustavo de Siqueira
    Stipkovic Filho, Marco
    Batalha, Gilmar Ferreira
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 179 (1-3) : 146 - 153
12345