A study on formation mechanism of friction-surfaced stainless steel coating via a stop-action method

被引：2

作者：

Guo, D. ^{[1
,2
]}

Lam, W. I. ^{[1
]}

Kwok, C. T. ^{[1
]}

Chan, S. L. I. ^{[3
,4
]}

Li, W. ^{[5
]}

机构：

[1] Univ Macau, Dept Electromech Engn, Macau, Peoples R China

[2] Inst Dev & Qual, Macau, Peoples R China

[3] Univ New South Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia

[4] Natl Cent Univ, Dept Chem & Mat Engn, Taoyuan 320, Taiwan

[5] Aerosp Engn Equipment Suzhou Co Ltd, Suzhou, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2022年 / 441卷

关键词：

Friction surfacing; Stainless steel coating; Formation mechanism; Microstructure; Texture; DYNAMIC RECRYSTALLIZATION; GRAIN-STRUCTURE; STRAIN-RATE; MICROSTRUCTURAL EVOLUTION; PLASTIC-DEFORMATION; TEXTURE FORMATION; 316L; HOT; 304L; COLD;

D O I：

10.1016/j.surfcoat.2022.128511

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The formation mechanism of a friction-surfaced (FSed) coating of super austenitic stainless steel AISI 904 L with high stacking fault energy was investigated with a stop-action method. The advancing side, center and retreating side of the surfaces and cross-sections of the coating and the bump were studied in detail using EBSD. The microstructure of the bump formed at the end was found to be different from that of the FSed coating. A systematic analysis of the microstructure revealed the formation mechanism of the coatings. A two-step formation mechanism of the FSed coating was proposed.

引用

页数：21

共 47 条

[1] Strengthened forced convection - A novel method for improving the pitting corrosion resistance of friction-surfaced stainless steel coating
Guo, D.
Kwok, C. T.
Chan, S. L. I.
[J]. MATERIALS & DESIGN, 2019, 182
[2] CHARACTERIZATION OF A FRICTION SURFACED STAINLESS STEEL COATING ON MEDIUM CARBON STEEL
Nixon, Rathinam George Sahaya
Sathish, Rengarajan
Mohanty, Bhulok Sundar
[J]. TRANSACTIONS OF FAMENA, 2018, 42 (04) : 53 - 62
[3] An experimental study on friction surfaced coating of Aluminium 6063 over AISI 316 stainless steel substrate
Sahoo, Dillip Kumar
Mohanty, Bhulok Sundar
Pradeep, Amal M., V
John, A. David Feby
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 40 : S10 - S18
[4] Pitting corrosion behavior of friction-surfaced 17-4PH stainless steel coatings with and without subsequent heat treatment
Guo, D.
Chen, J.
Chen, X.
Shi, Q.
Cristino, V. A. M.
Kwok, C. T.
Tam, L. M.
Qian, H.
Zhang, D.
Li, X.
[J]. CORROSION SCIENCE, 2021, 193
[5] CONTRIBUTION TO STUDY OF STAINLESS STEEL UNDER CONJUGATED ACTION OF FRICTION AND CORROSION
DESESTRE.A
SPAHN, H
WAGNER, GH
[J]. CORROSION TRAITEMENTS PROTECTION FINITION, 1971, 19 (04): : 159 - &
[6] Investigation on friction stir welding process of ferritic stainless steel and mechanism of defect formation
Tang W.
Yang X.
Li S.
Li H.
[J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (06): : 87 - 93and111
[7] Formation mechanism and reduction method of porosity in laser welding of stainless steel
Katayama, S
Seto, N
Kim, JD
Matsunawa, A
[J]. LASER MATERIALS PROCESSING CONFERENCE, PTS 1 & 2: ICALEO '97, 1997, : G83 - G92
[8] Friction surfaced tool steel (H13) coatings on low carbon steel: A study on the effects of process parameters on coating characteristics and integrity
Rafi, H. Khalid
Ram, G. D. Janaki
Phanikumar, G.
Rao, K. Prasad
[J]. SURFACE & COATINGS TECHNOLOGY, 2010, 205 (01): : 232 - 242
[9] A study on the mechanism of serrated grain boundary formation in an austenitic stainless steel
Kim, K. J.
Hong, H. U.
Nam, S. W.
[J]. MATERIALS CHEMISTRY AND PHYSICS, 2011, 126 (03) : 480 - 483
[10] Friction stir processing of austenitic stainless steel cold spray coating deposited on 304L stainless steel substrate: feasibility study
Thomas Perard
Alexey Sova
Hugo Robe
Vincent Robin
Yasser Zedan
Philippe Bocher
Eric Feulvarch
[J]. The International Journal of Advanced Manufacturing Technology, 2021, 115 : 2379 - 2393

← 1 2 3 4 5 →