Construction of High-Temperature Fixed-Point Cells for Thermodynamic Temperature Assignment

A multi-partner project is currently being conducted within Working Group 5 (Radiation thermometry) of the CIPM Consultative Committee for Thermometry (CCT), which aims at assigning thermodynamic temperatures to a selected set of high-temperature fixed-points (HTFPs) based on metal-carbon eutectics. A work package of this project (WP2) consists in producing sets of HTFP cells to serve the final phase of the project, assignment of definitive thermodynamic temperatures (WP5). The four fixed-point types are the metal-carbon eutectic points, Re-C (2474 degrees C), Pt-C (1739 degrees C), and Co-C (1324 degrees C), and the Cu point (1084.62 degrees C). The first phase of the WP2 work treats the construction of HTFP cells, which were carried out by eight National Metrology Institutes (NMIs). The cells were constructed in accordance to instructions laid out in the WP protocol, based on years of experience of WG5 member NMIs. Cells constructed in this way should, in principle, have the required performance in terms of the realized temperature, reproducibility, and long term stability. The constructed cells were then evaluated for their performance in the second phase of the WP. The WP aims at identifying at least four cells of each of the four fixed-point types to be supplied to WP5 of the CCT-WG5 research plan for final thermodynamic temperature assignment. This paper describes the first phase of the WP2. Details of the cell construction conditions and procedures are presented.