Fast Design and Analysis of Large Gantry Machining Center based on Unit Structure

被引：0
|
作者：
Cao, Lijie [1 ]
Chen, Weifang [1 ]
Chen, Yuzhi [1 ]
Ye, Wenhua [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Jiangsu, Peoples R China
来源：
MECHANICAL DESIGN AND POWER ENGINEERING, PTS 1 AND 2 | 2014年 / 490-491卷
关键词：
Fast design and analysis; unit structure; gantry machining center; large component structure; FEA analysis;
D O I：
10.4028/www.scientific.net/AMM.490-491.682
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Large gantry machining centers are used for machining of products in almost all industry. To raise the design and production efficiency of machining centers, an integrated method of fast design and analysis is proposed in this paper. Firstly, large components' unit structures are decomposed and extracted based on functions and structures. Then, after conducting fast analysis using APDL programming, a method of Comprehensive Evaluation is employed to optimal select the design schemes. Finally, the column of large gantry machining center QLMT6300 is taken as example to illustrate the validity of the method presented.
引用
收藏
页码：682 / 686
页数：5
相关论文
共 50 条
  • [1] Optimization Design for the Large Gantry Machining Center Crossbeam
    Huang, Qing
    Chen, Weifang
    Ye, Wenhua
    Lou, Peihuang
    Liu, Shihao
    [J]. MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 2284 - 2287
  • [2] Structure Analysis on Gantry Machining Center and Characteristic Analysis of Rolling Guide Interface
    Zhang, Zhengwei
    Jin, Chuyun
    Zhang, Jianrun
    [J]. DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 511 - +
  • [3] The Design and Optimization of Large-Scales Heavy Gantry NC Machining Center Based on Finite Element Method
    Xu, S. B.
    Sun, K. K.
    Jing, C. N.
    Ren, G. C.
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 656 - +
  • [4] Lightweight design and verification of gantry machining center crossbeam based on structural bionics
    Ling Zhao
    Jianfeng Ma
    Wuyi Chen
    Hongliang Guo
    [J]. Journal of Bionic Engineering, 2011, 8 : 201 - 206
  • [5] Lightweight Design and Verification of Gantry Machining Center Crossbeam Based on Structural Bionics
    Zhao, Ling
    Ma, Jianfeng
    Chen, Wuyi
    Guo, Hongliang
    [J]. JOURNAL OF BIONIC ENGINEERING, 2011, 8 (02) : 201 - 206
  • [6] Optimization Design for Fixed Table of Gantry Machining Center Based on Sensitivity and Topology Analyses
    郑彬
    殷国富
    黄辉
    陈强
    方辉
    [J]. Journal of Donghua University(English Edition), 2013, 30 (04) : 263 - 268
  • [7] Finite Element Analysis and Optimal Design Based on ANSYS in a XH2408 Gantry Style NC Machining Center
    WEI Feng-tao1
    [J]. International Journal of Plant Engineering and Management, 2010, 15 (03) : 188 - 192
  • [8] Finite Element Analysis and Optimization of Long-span Gantry NC Machining Center Structure
    Xu, Shubo
    Xi, Yang
    Jing, Cainian
    Sun, Keke
    [J]. SUSTAINABLE CONSTRUCTION MATERIALS AND COMPUTER ENGINEERING, 2012, 346 : 379 - +
  • [9] Structural design and optimization in the beam of a five-axis gantry machining center
    Li, Xin
    Huang, Ying
    Zhou, Zhi
    [J]. Journal of Engineering Science and Technology Review, 2020, 13 (01): : 77 - 85
  • [10] Design and Simulation of Fuzzy PID Controller for the Movable Beam in Gantry Machining Center
    Yang Xia
    Zhao Yan
    Xiao Zhu
    Guo Qingding
    [J]. ICCSSE 2009: PROCEEDINGS OF 2009 4TH INTERNATIONAL CONFERENCE ON COMPUTER SCIENCE & EDUCATION, 2009, : 474 - 478
12345