Flow distribution and heat transfer in minigap and minichannel heat exchangers during flow boiling

被引:18
|
作者
Klugmann, Michal [1 ]
Dabrowski, Pawel [1 ]
Mikielewicz, Dariusz [1 ]
机构
[1] Gdansk Univ Technol, Fac Mech Engn, Dept Energy & Ind Apparat, Narutowicza 11-12, PL-80233 Gdansk, Poland
关键词
Minigap; Pressure drop; Heat transfer coefficient; Visualisation; Maldistribution; Intensification; PRESSURE-DROP CHARACTERISTICS; REFRIGERANT DISTRIBUTION; TRANSFER COEFFICIENT; HORIZONTAL HEADERS; MICROCHANNEL; PERFORMANCE; MALDISTRIBUTION; MICROGAP;
D O I
10.1016/j.applthermaleng.2020.116034
中图分类号
O414.1 [热力学];
学科分类号
摘要
The topic of boiling heat transfer in miniscale geometries has focused the ever increasing interest of researchers in recent years. However, most of the works are related to mini- and microchannels and much less to minigaps. Meanwhile, minigaps allow for more comprehensive experimental studies, i.e. flow visualisations due to the flat, two-dimensional configuration of the flow. The results of the experimental investigations of a model plate heat exchanger, composed of a single plate with a heat exchange surface of 0.1 m x 0.2 m, made of brass are presented. The working fluid is pure ethanol. Between the plate and the cover of the exchanger, 0.5 mm and 1.0 mm thick minigaps are arranged. The 0.5 mm minigap has been compared to an equivalent minichannel structure (a set of 50 parallel minichannels) with an equal cross-sectional area (rectangular 1 mm x 1 mm). An attempt to intensify the heat exchange by modifying the minigap wall was made. Two variants were tested to check the potential increase in the heat transfer coefficient and flow resistance. The section cover is transparent in order to simultaneously register the flow structures with the measurements. The heat is supplied using a water circuit, where the temperature and flow of the water can be regulated in a constant temperature water tank. The flow configuration of the exchanger is countercurrent, with the vertical flow of ethanol from the bottom to the top. The inlet and outlet manifolds are arranged as trapezoidal (Z-type design). The authors have analysed the efficiency of heat transport and pressure drop depending on the system operating parameters. The visualisations are thoroughly analysed to better understand the process. The main advantages of the presented work are a direct comparison of minigap and minichannel structures while standardising all other parameters; an interesting application of a simple, passive heat transfer intensification method which resulted in the unification of the velocity fields in the minigap and reduced maldistribution.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Flow boiling heat transfer of R134a in the multiport minichannel heat exchangers
    Kaew-On, Jatuporn
    Sakamatapan, Kittipong
    Wongwises, Somchai
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2011, 35 (02) : 364 - 374
  • [2] Mitigation of Flow Maldistribution in Minichannel and Minigap Heat Exchangers by Introducing Threshold in Manifolds
    Dabrowski, P.
    [J]. JOURNAL OF APPLIED FLUID MECHANICS, 2020, 13 (03) : 815 - 826
  • [3] Water flow boiling heat transfer in vertical minichannel
    Enoki, Koji
    Ono, Masaharu
    Okawa, Tomio
    Kristiawan, Budi
    Wijayanta, Agung Tri
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2020, 117
  • [4] Heat transfer coefficient during flow boiling in a minichannel at variable spatial orientation
    Piasecka, Magdalena
    Maciejewska, Beata
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2015, 68 : 459 - 467
  • [5] Vapor separation application in minichannel heat sink flow boiling heat transfer
    Wang, Liangfeng
    Zhang, Jinxin
    Xiao, Jian
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2024, 199
  • [6] Influence of the Surface Enhancement on the Flow Boiling Heat Transfer in a Minichannel
    Piasecka, Magdalena
    Strak, Kinga
    [J]. HEAT TRANSFER ENGINEERING, 2019, 40 (13-14) : 1162 - 1175
  • [7] Saturated flow boiling heat transfer investigation for nanofluid in minichannel
    Zhou, Jianyang
    Luo, Xiaoping
    Feng, Zhenfei
    Xiao, Jian
    Zhang, Jinxin
    Guo, Feng
    Li, Haiyan
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2017, 85 : 189 - 200
  • [8] Flow Boiling Heat Transfer in A Minichannel with Enhanced Heating Surface
    Piasecka, Magdalena
    [J]. HEAT TRANSFER ENGINEERING, 2014, 35 (10) : 903 - 912
  • [9] Impact of selected thermal and flow parameters on flow boiling heat transfer in a minichannel
    Strak, Kinga
    Piasecka, Magdalena
    [J]. EXPERIMENTAL FLUID MECHANICS 2018 (EFM18), 2019, 213
  • [10] A MODIFIED CORRELATION FOR FLOW BOILING HEAT TRANSFER IN PLATE HEAT EXCHANGERS
    Lv, Tong
    Zheng, Boren
    Li, Wei
    Ayub, Zahid
    [J]. PROCEEDINGS OF THE ASME 6TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, 2019, 2019,