Motion and trajectory planning modeling for mobile landing mechanism systems based on improved genetic algorithm

被引:6
|
作者
Zhou, Jinhua [1 ]
Jia, Shan [1 ]
Chen, Jinbao [1 ]
Chen, Meng [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Aerosp Engn, Nanjing 210016, Peoples R China
关键词
mobile landing mechanism (MLM); cubic spline curve; trajectory planning; adaptive genetic algorithm (AGA); ROBOT MANIPULATORS; ROVER; OPTIMIZATION; EXPLORATION; DESIGN; FIELD;
D O I
10.3934/mbe.2021012
中图分类号
Q [生物科学];
学科分类号
07 ; 0710 ; 09 ;
摘要
In many traditional soft-landing missions, researchers design the lander and the rover as two separate individuals, which has its limitations. At present, research on landers mainly focuses on the performance analysis of those who cannot move, and the motion of legged mobile lander has not yet been studied. In this paper, a novel Mobile Landing Mechanism (MLM) is proposed. Firstly, the monte-Carlo method is used to solve the workspace, and the motion feasibility of the mechanism is verified. Secondly, combining with the constraints of velocity, acceleration and secondary acceleration of each driving joint of the MLM, the trajectory of its joint space is planned by using cubic spline curve. And based on the weighted coefficient method, an optimal time-jerk pedestal trajectory planning model is established. Finally, by comparing the genetic algorithm (GA) with the adaptive genetic algorithm (AGA), an optimization algorithm is proposed to solve the joint trajectory optimization problem of the MLM, which can obtain better trajectory under constraints. Simulation shows that the motion performance of the mechanism is continuous and stable, which proves the rationality and effectiveness of the foot trajectory planning method.
引用
收藏
页码:231 / 252
页数:22
相关论文
共 50 条
  • [1] Research on the Omni-directional Mobile Manipulator Motion Planning based on Improved Genetic Algorithm
    Jiang, Lin
    Liu, Baiyan
    Zeng, Liangcai
    Chen, Xinyuan
    Zhao, Jie
    Yan, Jihong
    2009 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION AND LOGISTICS ( ICAL 2009), VOLS 1-3, 2009, : 1920 - +
  • [2] The Motion Planning Based Genetic Algorithm For Wheeled Mobile Manipulator
    Zhang Shuosheng
    Liu Na
    MATERIAL SCIENCE AND ENGINEERING TECHNOLOGY, 2012, 462 : 141 - 146
  • [3] Path planning of mobile robot based on Improved Genetic Algorithm
    Wu, Meihua
    Chen, Erkui
    Shi, Qianqian
    Zhou, Luan
    Chen, Zhiqiang
    Li, Mengfan
    2017 CHINESE AUTOMATION CONGRESS (CAC), 2017, : 6696 - 6700
  • [4] Path Planning of Mobile Robot Based on an Improved Genetic Algorithm
    Zhang Yi
    Dai En-can
    Ren Tong-hui
    2016 2ND INTERNATIONAL CONFERENCE ON MECHANICAL, ELECTRONIC AND INFORMATION TECHNOLOGY ENGINEERING (ICMITE 2016), 2016, : 398 - 404
  • [5] Path planning for mobile robot based on improved genetic algorithm
    Wei T.
    Long C.
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2020, 46 (04): : 703 - 711
  • [6] Improved mobile robot motion planning algorithm based on differential evolution
    Do, Cong Hung
    Lin, Huei-Yung
    Chang, Chin-Chen
    Journal of Technology, 2021, 36 (03): : 169 - 175
  • [7] Autonomous Vehicle Motion Planning Based on Improved RRT* Algorithm and Trajectory Optimization
    Yuan J.-N.
    Yang L.
    Tang X.-F.
    Chen A.-W.
    Zidonghua Xuebao/Acta Automatica Sinica, 2022, 48 (12): : 2941 - 2950
  • [8] Dynamic Path Planning for Mobile Robot Based on Improved Genetic Algorithm
    Liu Changan
    Yan Xiaohu
    Liu Chunyang
    Li Guodong
    CHINESE JOURNAL OF ELECTRONICS, 2010, 19 (02): : 245 - 248
  • [9] Research on path planning of mobile robot based on improved genetic algorithm
    Li, Dongdong
    Wang, Lei
    Cai, Jingcao
    Wang, Anheng
    Tan, Tielong
    Gui, Jingsong
    INTERNATIONAL JOURNAL OF MODELING SIMULATION AND SCIENTIFIC COMPUTING, 2023, 14 (06)
  • [10] Global path planning of mobile robot based on improved genetic algorithm
    Xu, Xing
    Yu, Xuyang
    Zhao, Yun
    Liu, Chengxing
    Wu, Xiang
    Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2022, 28 (06): : 1659 - 1672