NUMERICAL SIMULATION OF A SPOUTED BED WITH A DRAFT TUBE WITH AND WITHOUT LIQUID SPRAY

被引：8

作者：

Li, Tingwen ^{[1
]}

Pougatch, Konstantin ^{[1
]}

Salcudean, Martha ^{[1
]}

Grecov, Dana ^{[1
]}

机构：

[1] Univ British Columbia, Dept Mech Engn, Vancouver, BC V6T 1Z4, Canada

来源：

CANADIAN JOURNAL OF CHEMICAL ENGINEERING | 2009年 / 87卷 / 02期

关键词：

spouted bed; draft tube; liquid spray; frictional model; numerical simulation; FLUIDIZED-BED; SOLIDS CIRCULATION; FRICTIONAL STRESS; PARTICLE-VELOCITY; VOIDAGE PROFILES; SELF-DIFFUSION; KINETIC-THEORY; FLOW; COEFFICIENT; RESTITUTION;

D O I：

10.1002/cjce.20161

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Numerical simulations of the gas-solid flow in a flat-based spouted bed with a draft tube (DTSB) are conducted with a Eulerian-Eulerian granular kinetic model. The hydrodynamics of the flow in DTSB is investigated and compared with published experimental data. The effect of the gas velocity on the particles circulation rate is evaluated, and parametric studies of the restitution coefficient are performed. In addition, several different frictional models are tested. A model for the liquid spray injection into a gas-solid flow is proposed and implemented into a commercial CFD solver, Fluent 6.3. The liquid spray introduced through the bottom nozzle is simulated, and the influence of spray rate on solids concentration and velocity inside the draft tube is examined.

引用

页码：237 / 251

页数：15

共 50 条

[1] HYDRODYNAMICS OF A SPOUTED BED WITH A DRAFT TUBE
IJICHI, K
TANAKA, Y
YOSHIDA, K
[J]. KAGAKU KOGAKU RONBUNSHU, 1988, 14 (04) : 566 - 570
[2] Spouted bed with a draft tube without gas inlet nozzle or orifice
Hattori, H
Nagai, T
[J]. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1996, 29 (03) : 484 - 487
[3] Drying of suspensions in the draft tube spouted bed
Arsenijevic, ZL
Grbavcic, ZB
Garic-Grulovic, RV
[J]. CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2004, 82 (03): : 450 - 464
[4] Solid circulation in a spouted bed with a draft tube
Ji, HS
Tsutsumi, A
Yoshida, K
[J]. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1998, 31 (05) : 842 - 845
[5] DRYING CHARACTERISTICS OF A DRAFT TUBE SPOUTED BED
KHOE, GK
VANBRAKEL, J
[J]. CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1983, 61 (03): : 411 - 418
[6] Hydrodynamics of a spouted bed with a porous draft tube
Ishikura, T
Nagashima, H
Ide, M
[J]. KAGAKU KOGAKU RONBUNSHU, 1996, 22 (03) : 615 - 621
[7] Grain Drying in a Paraboloid-Based Spouted Bed with and without Draft Tube
Evin, Duygu
Gul, Hasan
Tanyildizi, Vedat
[J]. DRYING TECHNOLOGY, 2008, 26 (12) : 1577 - 1583
[8] HYDRODYNAMIC BEHAVIOR OF A DRAFT TUBE GAS-LIQUID SOLID SPOUTED BED
FAN, LS
HWANG, SJ
MATSUURA, A
[J]. CHEMICAL ENGINEERING SCIENCE, 1984, 39 (12) : 1677 - 1688
[9] CFD modeling of a spouted bed with a porous draft tube
Salar Azizi
Seyyed Hossein Hosseini
M.Moraveji
Goodarz Ahmadi
[J]. Particuology, 2010, 8 (05) : 415 - 424
[10] CFD modeling of a spouted bed with a porous draft tube
Azizi, Salar
Hosseini, Seyyed Hossein
Moraveji, M.
Ahmadi, Goodarz
[J]. PARTICUOLOGY, 2010, 8 (05) : 415 - 424

← 1 2 3 4 5 →