An arm wrestling robot driven by dielectric elastomer actuators

The first arm wrestling match between a human arm and a robotic arm driven by electroactive polymers ( EAP) was held at the EAPAD conference in 2005. The primary objective was to demonstrate the potential of the EAP actuator technology for applications in the field of robotics and bioengineering. The Swiss Federal Laboratories for Materials Testing and Research (Empa) was one of the three organizations participating in this competition. The robot presented by Empa was driven by a system of rolled dielectric elastomer ( DE) actuators. Based on the calculated stress condition in the rolled actuator, a low number of pre-strained DE film wrappings were found to be preferential for achieving the best actuator performance. Because of the limited space inside the robot body, more than 250 rolled actuators with small diameters were arranged in two groups according to the human agonist - antagonist muscle configuration in order to achieve an arm-like bidirectional rotation movement. The robot was powered by a computer-controlled high voltage amplifier. The rotary motion of the arm was activated and deactivated electrically by corresponding actuator groups. The entire development process of the robot is presented in this paper where the design of the DE actuators is of primary interest. Although the robot lost the arm wrestling contest against the human opponent, the DE actuators have demonstrated very promising performance as artificial muscles. The scientific knowledge gained during the development process of the robot has pointed out the challenges to be addressed for future improvement in the performance of rolled dielectric elastomer actuators.