A Review on Tool Wear Optimization of Rubberized Fly Ash Geopolymer Material

被引：0

作者：

Zain, N. ^{[1
]}

Shuaib, N. A. ^{[1
,2
]}

Abdullah, M. M. A. ^{[2
,3
]}

Nasir, S. M. ^{[1
,2
]}

Tahir, Faheem ^{[2
,4
]}

机构：

[1] Univ Malaysia Perlis, Sch Mfg Engn, Pauh Putra Campus, Arau 02600, Perlis, Malaysia

[2] Univ Malaysia Perlis, Ctr Excellence Geopolymer & Green Technol CEGeoGT, Kangar 01000, Perlis, Malaysia

[3] Univ Malaysia Perlis, Fac Engn Technol, Padang Besar 02100, Perlis, Malaysia

[4] Univ Malaysia Perlis, Sch Mat Engn, Kangar 01000, Perlis, Malaysia

来源：

5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019) | 2019年 / 2129卷

关键词：

D O I：

10.1063/1.5118200

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Geopolymer was widely used for development purposes, but only a few were tested for machining purposes. Therefore, there are several attempts of using geopolymer as more eco-friendly material which can be a good replacement of the existing material. The main significance of this study is to observe the machinability rubberized fly ash geopolymer material lathe process. The parameter plays big role in machining of rubberized fly ash geopolymer to obtain the least tool wear, as it apply significant effect on the material. Besides, the success of this result is significant so it can replace the conventional materials used in common machining activities in industry.

引用

页数：5

共 50 条

[1] Tool Wear Evaluation on Rubberized Fly Ash Geopolymer Milling
Yu, Tan Chun
Fathullah, M.
Abdullah, M. M. A.
Shayfull, Z.
Tahir, Faheem
[J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[2] Parameter Optimization on Rubberized Fly Ash Geopolymer in Milling Process in Minimizing Tool Wear
Yu, Tan Chun
Fathullah, M.
Abdullah, M. M. A.
Shayfull, Z.
Tahir, Faheem
[J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[3] A Review on Cutting Tool Wear in the Machining of Fly Ash Geopolymer
Fauziah, P. Y.
Fathullah, M.
Abdullah, M. M. A.
Faris, Meor Ahmad
Tahir, Faheem
Shayfull, Z.
Nasir, S. M.
Lih, Tan Chye
Wazien, A. Z. W.
[J]. GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
[4] Rubberized Fly Ash Geopolymer: Optimizing parameter Towards Minimizing Tool Wear in Lathe Operation
Zain, N.
Nasir, S. M.
Abdullah, M. M. A.
Shuaib, N. A.
Tahir, Faheem
[J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[5] Cutting Tool Wear Optimization in the Machining of Fly Ash Geopolymer using Taguchi Method
Fauziah, P. Y.
Fathullah, M.
Abdullah, M. M. A.
Faris, Meor Ahmad
Tahir, Faheem
Shayfull, Z.
Nasir, S. M.
Shazzuan, M.
Wazien, A. Z. W.
[J]. GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
[6] Surface Integrity of Rubberized Geopolymer Fly Ash Geopolymer in Milling Machining
Norsyafikah, S.
Fathullah, M.
Abdullah, M. M. A.
Shayfull, Z.
Tahir, Faheem
[J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[7] Thermal resistance of fly ash based rubberized geopolymer concrete
Luhar, Salmabanu
Chaudhary, Sandeep
Luhar, Ismail
[J]. JOURNAL OF BUILDING ENGINEERING, 2018, 19 : 420 - 428
[8] Surface Roughness Optimization on Rubberized Fly Ash Geopolymer in Lathe Operation Using Taguchi Method
Paizun, A. A.
Fathullah, M.
Abdullah, M. M. A.
Shayfull, Z.
Tahir, Faheem
[J]. 5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[9] A Review on Fly Ash as a Raw Cementitious Material for Geopolymer Concrete
Bouaissi, Aissa
Li, Long Yuan
Moga, Ligia Mihaela
Sandu, Ioan Gabriel
Abdullah, Mohd Mustafa Al Bakri
Sandu, Andrei Victor
[J]. REVISTA DE CHIMIE, 2018, 69 (07): : 1661 - 1667
[10] Chemical and Physical Characterization of Fly Ash as Geopolymer Material
Risdanareni, Puput
Puspitasari, Poppy
Jaya, Ekaputri Januarti
[J]. ENGINEERING TECHNOLOGY INTERNATIONAL CONFERENCE 2016 (ETIC 2016), 2017, 97

← 1 2 3 4 5 →