A New Dead-time Compensation Method on Direct Torque Control System based on DSP

被引：0
|
作者：
Zhou, L. Q. [1 ]
机构：
[1] Huangshi Inst Technol, Sch Elect & Elect Informat Engn, Huangshi, Hubei Province, Peoples R China
来源：
ICIEA: 2009 4TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-6 | 2009年
关键词：
pulse width modulation; DTC; dead time compensation;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In direct torque control, the voltage source inverter (VSI) was controlled based on Space-vector pulse width modulation (SVPWM). The SVPWM is an excellent control strategy, but the relation between reference voltage and actual output voltage is nonlinear due to the dead time effect and the voltage drop of power devices. The distortion of voltage invokes serious problems such as current waveform distortion and deterioration of the systems. An improved method which reduces the distortion of voltage and current in induction motor direct torque control (DTC) system is presented. It compensated three-phase voltages in terms of current directions. The method can be implemented with software without any extra hardware. The experiment results verify this method has a good compensation effect.
引用
收藏
页码：2350 / 2353
页数：4
相关论文
共 50 条
  • [1] Dead-time Compensation Method of SVPWM based on DSP
    Zhou, L. Q.
    [J]. ICIEA: 2009 4TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-6, 2009, : 2346 - 2349
  • [2] A novel dead-time compensation method for direct predictive control
    Yang, Ming
    Yang, Kaixuan
    Li, Guang
    Yi, Chen
    Xu, Dianguo
    [J]. 2015 FIFTH INTERNATIONAL CONFERENCE ON INSTRUMENTATION AND MEASUREMENT, COMPUTER, COMMUNICATION AND CONTROL (IMCCC), 2015, : 273 - 277
  • [3] Study of Dead-Time Compensation on Direct Torque Control of ALA Rotor Motor
    Zhou, L. Q.
    [J]. ICEMS 2008: PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1- 8, 2008, : 3311 - 3314
  • [4] A new on-line dead-time compensation method based on time delay control
    Kim, HS
    Kim, HW
    Youn, MJ
    [J]. IECON'01: 27TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3, 2001, : 1184 - 1189
  • [5] Dead-time Compensation Method Based on Field Oriented Control Strategy
    Miao, Zichao
    Wei, Jiangfeng
    Guo, Tingting
    Zheng, Mingyue
    [J]. 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY, ENVIRONMENT AND CHEMICAL ENGINEERING, 2019, 358
  • [6] An Adaptive Dead-time Compensation Method based on Predictive Current Control
    Yang, Kaixuan
    Yang, Ming
    Lang, Xiaoyu
    Lang, Zhi
    Xu, Dianguo
    [J]. 2016 IEEE 8TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (IPEMC-ECCE ASIA), 2016, : 121 - 125
  • [7] On-line dead-time compensation method based on time delay control
    Kim, HS
    Kim, KH
    Youn, MJ
    [J]. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2003, 11 (02) : 279 - 285
  • [8] Dead Time Influence and Compensation of Direct Torque Control
    Qiu, Xin
    Huang, Wenxin
    Bu, Feifei
    Cui, Weijia
    [J]. 2014 17TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2014, : 563 - 566
  • [9] Dead-Time Compensation Method Based on UCE-Measurement for Direct Converters
    Remus, Nico
    Leubner, Martin
    Hofmann, Wilfried
    [J]. 2018 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2018, : 576 - 583
  • [10] A novel method for dead-time compensation based on SVPWM
    Hu, QB
    Hu, HB
    Lu, ZY
    Yao, WX
    [J]. APEC 2005: TWENTIETH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1-3, 2005, : 1867 - 1870
12345