Kinetic study and optimization on SNCR process in pressurized oxy-combustion

被引:18
|
作者
Rahman, Zia ur [1 ]
Wang, Xuebin [1 ]
Zhang, Jiaye [1 ]
Baleta, Jakov [2 ]
Vujanovic, Millan [3 ]
Tan, Houzhang [1 ]
机构
[1] Xi An Jiao Tong Univ, MOE Key Lab Thermofluid Sci & Engn, Xian, Peoples R China
[2] Univ Zagreb, Fac Met, Aleja Narodnih Heroja 3, Sisak, Croatia
[3] Naval Architecture Univ Zagreb, Fac Mech Engn, Zagreb, Croatia
基金
中国国家自然科学基金;
关键词
Pressurized oxy-combustion; SNCR; Chemkin; Ammonia; Rate of production; PRODUCT BRANCHING RATIO; NH2+NO REACTION; NITRIC-OXIDE; SHOCK-TUBE; REDUCTION; NO; CHEMISTRY; NITROGEN; SULFUR; AMMONIA;
D O I
10.1016/j.joei.2020.09.010
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Pressurized Oxy-combustion is one of the most promising technologies for carbon capture, utilization, and storage (CCUS) of coal utilization. In pressurized oxy-combustion, the removal of acid gas pollutants and the latent heat of moisture condensation are mainly carried out by an integrated direct-contact wash column (DCC). Recent studies have shown that the inlet concentration of NOx in the column is important for the combined removal of NOx and SOx, therefore, it is essential to control the NOx emissions before the DCC. Selective non-catalytic reduction (SNCR) is a promising and economical technology of NOx reduction; however, no study has been conducted on SNCR at elevated pressure, especially in pressurized oxy-combustion. In this paper, kinetic modeling is carried out to explore and optimize the NOx reduction by SNCR in pressurized oxy-combustion. First, the detailed mechanism used in this study is validated by the experimental results in literature. Based on the validation of the detailed mechanism, the effects of different parameters including temperature, oxygen concentration, moisture content, NH3 concentration, and SO2 concentrations on the SNCR performance are analyzed at higher pressures in oxy-combustion atmosphere. The modeling results show that by increasing the pressure from 1 atm to 15 atm, the SNCR de-NOx efficiency increased by 2-3%. The width of the optimum temperature window for maximum De-NOx is broadened from 1250K to 1450K with increasing the pressure from 1 atm to 10 atm. The increase of pressure has no significant effect on thermal de-NOx efficiency with increasing the NH3/NO ratio. At higher pressure (10 atm) the increase in O-2 concentration from 1 to 20% the de-NOx efficiency decreases almost twice as much as at 1 atm. The increase of SO2 and moisture contents at high pressure have no significant effect on the de-NOx efficiency. Rate of production (ROP) and sensitivity analysis are performed to determine the dominant reaction paths of de-NOx in pressurized-oxy SNCR process. This study can provide guidance for the process optimization of de-NOx by SNCR in pressurized oxy-combustion. (C) 2020 Energy Institute. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:263 / 271
页数:9
相关论文
共 50 条
  • [1] A kinetic evaluation and optimization study on NOx reduction by reburning under pressurized oxy-combustion
    Rahman, Zia ur
    Zhang, Jiaye
    Zhang, Lan
    Wang, Xuebin
    Yang, Zhiwei
    Tan, Houzhang
    Axelbaum, Richard L.
    [J]. JOURNAL OF ENVIRONMENTAL MANAGEMENT, 2021, 290
  • [2] Interactions of HCN with NO in pressurized oxy-combustion
    Lv, Zhaomin
    Rahman, Ziaur
    Wang, Xuebin
    Xiong, Xiaohe
    Tan, Houzhang
    [J]. ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2023, 18 (01)
  • [3] A KINETIC EVALUATION ON NO2 FORMATION IN THE POST-FLAME REGION OF PRESSURIZED OXY-COMBUSTION PROCESS
    Wang, Xuebin
    Dai, Gaofeng
    Yablonsk, Gregory
    Vujanovic, Milan
    Axelbaum, Richard
    [J]. THERMAL SCIENCE, 2021, 25 (04): : 2609 - 2620
  • [4] Experimental and kinetic study of N2O thermal decomposition in pressurized oxy-combustion
    Dai, Gaofeng
    Zhang, Su
    Zhang, Yixiang
    Liao, Yuhan
    Zhang, Jiaye
    Tan, Houzhang
    Mikulc, Hrvoje
    Wang, Xuebin
    [J]. FUEL, 2023, 346
  • [5] Kinetics of pressurized oxy-combustion of coal chars
    Babinski, Piotr
    Labojko, Grzegorz
    Kotyczka-Moranska, Michalina
    Sciazko, Marek
    [J]. THERMOCHIMICA ACTA, 2019, 682
  • [6] Optimizing complexity in the kinetic modelling of integrated flue gas purification for pressurized oxy-combustion
    Verma, Piyush
    Gromotka, Zoe
    Yablonsky, Gregory
    Stokie, David
    Constales, Denis
    Kumfer, Ben
    Axelbaum, Richard L.
    [J]. CHEMICAL ENGINEERING JOURNAL, 2020, 383
  • [7] Calcination and desulfurization characteristics of calcium carbonate in pressurized oxy-combustion
    Dai, Gaofeng
    Zhang, Jiaye
    Wang, Xuebin
    Tan, Houzhang
    Rahman, Zia Ur
    [J]. ENERGY, 2022, 261
  • [8] DEVELOPMENT OF A 25 MWTH FLAMELESS PRESSURIZED OXY-COMBUSTION PILOT
    Schmitt, Joshua
    Malavasi, Massimo
    [J]. PROCEEDINGS OF ASME TURBO EXPO 2021: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 6, 2021,
  • [9] Process design and performance analysis of a Staged, Pressurized Oxy-Combustion (SPOC) power plant for carbon capture
    Gopan, Akshay
    Kumfer, Benjamin M.
    Phillips, Jeffrey
    Thimsen, David
    Smith, Richard
    Axelbaum, Richard L.
    [J]. APPLIED ENERGY, 2014, 125 : 179 - 188
  • [10] KINETIC ANALYSIS OF CO FORMATION UNDER OXY-COMBUSTION CONDITIONS
    Jerzak, Wojciech
    Kuznia, Monika
    [J]. ECOLOGICAL CHEMISTRY AND ENGINEERING A-CHEMIA I INZYNIERIA EKOLOGICZNA A, 2014, 21 (04): : 415 - 424