An Electro-Magnetic Actuator for Printing Solder

被引:0
|
作者
Kessling, O. [1 ]
Harnisch, J. [1 ]
Irlinger, F. [1 ]
Lueth, T. [1 ]
机构
[1] TU Muenchen, Dept Micro Technol & Med Device Technol, Munich, Germany
关键词
Flip-chip devices; High Temperature Actuator; High Temperature Printhead; Drop-on-Demand;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
A new actuator for printing a wide variety of fluids is presented. Fluids with a density up to 10 g/cm(3) and a surface tension up to 550 mPa can be printed. The printhead works up to 500 degrees C. Several application areas, such as printing of solder, and 3D-printing for the presented printhead are possible. With this actuator measurements with water are accomplished. The droplet volume and velocity in dependence of the control signal are measured. Droplet volumes in the range from 500 to 2500 pl and droplet velocities from 2 to 7.5 m/s are obtained. Further measurements approve the printing of solder. A test layout for the placement of flip-chips is printed and the diameter and the height of the bumps are measured. The standard deviation is calculated in order to approve the repeatability of the process.
引用
收藏
页码:461 / 464
页数:4
相关论文
共 50 条
  • [1] Solder Bumping for flip-chips with an electro-magnetic actuator
    Kessling, O. S.
    Irlinger, F.
    Lueth, T. C.
    [J]. ESTC 2008: 2ND ELECTRONICS SYSTEM-INTEGRATION TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2008, : 981 - 984
  • [2] CMOS integrated electro-magnetic force actuator
    Abu-Nimeh, Faisal T.
    Salem, Fathi M.
    [J]. IEEE MWSCAS'06: PROCEEDINGS OF THE 2006 49TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOL II, 2006, : 395 - +
  • [3] Design, analysis and control of an electro-magnetic actuator
    Chen, MY
    Lin, TB
    Huang, SG
    Fu, LC
    [J]. PROCEEDINGS OF THE 2003 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2003, : 3095 - 3100
  • [4] New electro-magnetic actuator for active vibration isolators
    Dong-Pyo Hong
    Ha-Young Hwang
    Moo-Yeon Lee
    Yang-Keun Jo
    Duc-Thuan Vu
    Dong-Yeon Lee
    [J]. International Journal of Precision Engineering and Manufacturing, 2015, 16 : 209 - 212
  • [5] New Electro-Magnetic Actuator for Active Vibration Isolators
    Hong, Dong-Pyo
    Hwang, Ha-Young
    Lee, Moo-Yeon
    Jo, Yang-Keun
    Duc-Thuan Vu
    Lee, Dong-Yeon
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2015, 16 (01) : 209 - 212
  • [6] Damping of Machine Frame Vibrations by an Electro-magnetic Actuator
    Stein, G. J.
    Chmurny, R.
    [J]. MECHATRONICS 2013: RECENT TECHNOLOGICAL AND SCIENTIFIC ADVANCES, 2014, : 151 - 160
  • [7] Electro-magnetic actuator with simple magnetic path increases efficiency and reduces cost
    Germann, LM
    Lutter, DR
    [J]. ACTUATOR TECHNOLOGY AND APPLICATIONS, 1996, 2865 : 84 - 92
  • [8] Optimal Design of the Electro-magnetic Actuator for High Voltage Circuit Breaker
    Kang, Jong-Ho
    Jung, Hyun-Kyo
    [J]. APPLIED ELECTROMAGNETIC ENGINEERING FOR MAGNETIC, SUPERCONDUCTING AND NANOMATERIALS, 2011, 670 : 381 - 390
  • [9] A new mechanism design of electro-magnetic actuator for a micro-positioner
    Chen, Mei-Yung
    Tzeng, Huan-Wen
    Hung, Shao-Kang
    [J]. ISA TRANSACTIONS, 2007, 46 (01) : 41 - 48
  • [10] Nonlinear Control of an Electro-Magnetic Actuator under Highly Dynamic Disturbances
    Schwarzgruber, T.
    Trogmann, H.
    Passenbrunner, T. E.
    Fizek, S.
    Dolovai, P.
    [J]. 2012 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS (CCA), 2012, : 974 - 979