FRACTURE BEHAVIOR OF HIGH-STRENGTH-STEEL SINTERED STEELS FE-MO-C

被引：0

作者：

Ionici, Cristina ^{[1
]}

机构：

[1] Univ Constantin Brancusi Tg Jiu, Tagu Jiu, Romania

来源：

NANO, BIO AND GREEN - TECHNOLOGIES FOR A SUSTAINABLE FUTURE, VOL I (SGEM 2015) | 2015年

关键词：

steels sintered; crack propagation; fracture; pores transcrystalline;

D O I：

暂无

中图分类号：

Q81 [生物工程学（生物技术）]; Q93 [微生物学];

学科分类号：

071005 ; 0836 ; 090102 ; 100705 ;

摘要：

This paper presents attempts to tear and tear fracture of steels sintered iron powder with added molybdenum and carbon. Toughness values in the range 27,8-reach 38 MPa. There is a discontinuous crack propagation, fracture is ductile matrix base is easily observed pores transcrystalline and free. Hardness and toughness tests are performed on specimens pre - cracate, they give more information than specimens with notch. Units provide more targets for crack resistance of the material analyzed in comparison with notched specimens. Two grupe of test sample have been obtained from elemental and prealloyed powders. High temperatures sintering lead to increased resistance to mechanical testing of materials and crack propagation will be due to several microvolume between pores. Initial pore morphology changed continuously in the process of sintering.

引用

页码：69 / 74

页数：6

共 50 条

[1] LOW-TEMPERATURE ION-NITRIDING OF FE-MO-C SINTERED STEELS
MOLINARI, A
TESI, B
BACCI, T
PRADELLI, G
JOURNAL DE PHYSIQUE IV, 1993, 3 (C7): : 949 - 954
[2] TEMPERED MARTENSITE EMBRITTLEMENT IN FE-MO-C AND FE-W-C STEEL
KWON, H
KIM, CH
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (07): : 1389 - 1394
[3] Image analysis of austenite and carbides coarsening in a Fe-Mo-C steel
Chaix, JM
Yang, PH
Ardin, M
DurandCharre, M
MICROSCOPY MICROANALYSIS MICROSTRUCTURES, 1996, 7 (5-6): : 387 - 392
[4] DESIGN OF STRONG TOUGH FE-MO-C MARTENSITIC STEELS AND EFFECTS OF COBALT
CLARK, RA
THOMAS, G
METALLURGICAL TRANSACTIONS, 1975, A 6 (05): : 969 - 979
[5] STRUCTURE OF M6C CARBIDE IN CAST HIGH-SPEED STEELS OF THE FE-MO-C SYSTEM
TARAN, YN
NESTERENKO, AM
METAL SCIENCE AND HEAT TREATMENT, 1977, 19 (11-1) : 970 - 973
[6] PHASE STATES OF Fe-Mo-C SPINNING ALLOYS AT HIGH TEMPERATURES
Velikanova, T. A.
Karpets, M. V.
Agraval, P. G.
Turchanin, M. A.
POWDER METALLURGY AND METAL CERAMICS, 2011, 49 (9-10) : 606 - 615
[7] A THERMODYNAMIC EVALUATION OF THE FE-MO-C SYSTEM
ANDERSSON, JO
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 1988, 12 (01): : 9 - 23
[8] Fatigue fracture behavior of high strength Cr-Mo-V steel
National Key Lab. of Advanced Steel Processing Technology and Materials, Beijing 100081, China
不详
不详
不详
Cailiao Rechuli Xuebao, 2007, 5 (37-41):
[9] HIGH-TEMPERATURE PHASE-EQUILIBRIA IN THE SYSTEM FE-MO-C
GIRON, G
DURANDCHARRE, M
ZEITSCHRIFT FUR METALLKUNDE, 1995, 86 (01): : 15 - 21
[10] Influence of porosity on the sliding wear behavior of sintered Fe-1.5Mo-0.7C steels
Wang, J
He, Y
Danninger, H
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2003, 12 (03) : 339 - 344

← 1 2 3 4 5 →