Influence of wall material on solidification characteristic of water based encapsulated PCM capsule

被引：0

作者：

Sundaram, P. ^{[1
]}

Kumar, S. Rajendra ^{[1
]}

Afridi, Mohammed Shahid ^{[1
]}

Anthony, Alfred ^{[1
]}

机构：

[1] SRM Inst Sci & Technol, Dept Mech Engn, Chennai 603203, Tamil Nadu, India

来源：

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018) | 2018年 / 402卷

关键词：

D O I：

10.1088/1757-899X/402/1/012201

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The experimental study is performed to investigate the solidification behaviour of water-based PCM in different capsule materials filled with 90% of its volume. The experiments are conducted with two stainless steel material and high-density polyethylene (HDPE) spherical capsules are maintained at different surrounding temperatures of -9 degrees C and -12 degrees C filled with 90% of PCM in its total fill volume. From the experimental results observed that the capsule material gives considerable effect on subcooling at lower temperature driving potential. Considering the experimental study which is concluded that solidification process time of encapsulated PCM of stainless steel material requires less time comparing to HDPE material.

引用

页数：6

共 50 条

[1] Simple analitycal and experimental method of solidification PCM material inside a spherical capsule
Lipnicki, Zygmunt
Malolepszy, Tomasz
Gortych, Marta
Grabas, Piotr
[J]. International Communications in Heat and Mass Transfer, 2022, 135
[2] Simple analitycal and experimental method of solidification PCM material inside a spherical capsule
Lipnicki, Zygmunt
Malolepszy, Tomasz
Gortych, Marta
Grabas, Piotr
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2022, 135
[3] Solidification characteristics of water based graphene nanofluid PCM in a spherical capsule for cool thermal energy storage applications
Sathishkumar, A.
Kumaresan, V.
Velraj, R.
[J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2016, 66 : 73 - 83
[4] Enhanced heat transfer characteristics of water based copper oxide nanofluid PCM (phase change material) in a spherical capsule during solidification for energy efficient cool thermal storage system
Chandrasekaran, P.
Cheralathan, M.
Kumaresan, V.
Velraj, R.
[J]. ENERGY, 2014, 72 : 636 - 642
[5] SOLIDIFICATION AND MELTING HEAT-TRANSFER TO AN UNFIXED PHASE-CHANGE MATERIAL (PCM) ENCAPSULATED IN A HORIZONTAL CONCENTRIC ANNULUS
BETZEL, T
BEER, H
[J]. WARME UND STOFFUBERTRAGUNG-THERMO AND FLUID DYNAMICS, 1988, 22 (06): : 335 - 344
[6] Simulation of the thermal and energy behaviour of a composite material containing encapsulated-PCM: Influence of the thermodynamical modelling
Tittelein, Pierre
Gibout, Stephane
Franquet, Erwin
Johannes, Kevyn
Zalewski, Laurent
Kuznik, Frederic
Dumas, Jean-Pierre
Lassue, Stephane
Bedecarrats, Jean-Pierre
David, Damien
[J]. APPLIED ENERGY, 2015, 140 : 269 - 274
[7] Influence of wall thermal performance on the contribution efficiency of the Phase-Change Material (PCM) layer
Wu, Qian
Wang, Jiahui
Meng, Xi
[J]. CASE STUDIES IN THERMAL ENGINEERING, 2021, 28
[8] Effect on solidification of deionized water based PCM in a spherical encapsulation- An experimental study
Sundaram, P.
Kalaisselvane, A.
[J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
[9] Experimental test of a hot water storage system including a macro-encapsulated phase change material (PCM)
Mongibello, L.
Atrigna, M.
Bianco, N.
Di Somma, M.
Graditi, G.
Risi, N.
[J]. 34TH UIT HEAT TRANSFER CONFERENCE 2016, 2017, 796
[10] Encapsulated high temperature PCM as active filler material in a thermocline-based thermal storage system
Munoz-Sanchez, B.
Iparraguirre-Torres, I.
Madina-Arrese, V.
Izagirre-Etxeberria, U.
Unzurrunzaga-Iturbe, A.
Garcia-Romero, A.
[J]. INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, SOLARPACES 2014, 2015, 69 : 937 - 946

← 1 2 3 4 5 →