Low stress welding technology without post-weld heat treatment

被引：3
|
作者：
Xu, J. J. [1 ]
Chen, L. G. [1 ]
Ni, C. Z. [1 ]
机构：
[1] Shanghai Jiao Tong Univ, Welding Inst, Sch Mat Sci & Engn, Shanghai 200240, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2009年 / 25卷 / 08期
关键词：
Residual stress; Vibratory welding; Welding joint; Finite element method; Fracture toughness; RESIDUAL-STRESS; TEMPERATURE DISTRIBUTION; REDUCTION; STEEL;
D O I：
10.1179/174328408X369393
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to assure the tightness and the service life of a full welded body ball valve, the temperature of grommet cannot exceed 150 degrees C. Therefore, post-weld heat treatment cannot be used to relieve the welding residual stresses. In this study, a low stress welding technology was studied. The type of welding joint was optimised through the finite element method and vibratory welding was employed to decrease the residual stress. At the same time, the fracture toughness behaviour of weld zone and heat affected zone in terms of crack tip opening displacement was investigated to assess the safety of valve without PWHT in the active service. Finally, the results are discussed and analysed.
引用
收藏
页码：976 / 980
页数：5
相关论文
共 50 条
  • [1] The repair welding of power plant without post-weld heat treatment
    Brett, SJ
    Abson, DJ
    Jones, RL
    INTERNATIONAL CONFERENCE ON INTEGRITY OF HIGH-TEMPERATURE WELDS, 1998, : 53 - 63
  • [2] Evaluation of residual stress near the weld overlay cladding by welding and post-weld heat treatment
    Makoto, Udagawa
    Jinya, Katsuya
    Hiroyuki, Nishikawa
    Kunio, Onizawa
    Welding International, 2014, 28 (07) : 521 - 534
  • [3] Evaluation of residual stress near the weld overlay cladding by welding and post-weld heat treatment
    Udagawa M.
    Katsuyama J.
    Nishikawa H.
    Onizawa K.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2010, 28 (03): : 261 - 271
  • [4] A study on welding technology and post-weld heat treatment of SA543 steel
    Bo, Huaquan
    Chen, Xuedong
    Dou, Wanbo
    Luo, Xuemei
    FROM FAILURE TO BETTER DESIGN, MANFACTURE AND CONSTRUCTION, 2012, : 213 - 218
  • [5] RESIDUAL STRESS RELIEF IN POST-WELD HEAT TREATMENT
    Dong, Pingsha
    Hong, Jeong K.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2008, VOL 6, PT A AND B, 2009, : 321 - 329
  • [6] A study on the mechanical stress relieving and safety assessment without post-weld heat treatment
    Xu, Jijin
    Chen, Ligong
    Ni, Chunzhen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 443 (1-2): : 107 - 113
  • [7] Specification, development, and optimization of the welding and post-weld heat treatment procedures
    Hunter, ANR
    Bell, WM
    McDonald, EJ
    BOILER SHELL WELD REPAIR: SIZEWELL: A NUCLEAR POWER STATION, 1999, 1999 (14): : 169 - 197
  • [8] A viscoplastic model for numerical simulation of welding and post-weld heat treatment
    Razakanaivo, A
    Waeckel, F
    JOURNAL DE PHYSIQUE IV, 1999, 9 (P9): : 371 - 381
  • [9] Weld repair of grade 91 steel without post-weld heat treatment
    Brett, S. J.
    Mitchell, K. C.
    MATERIALS RESEARCH INNOVATIONS, 2013, 17 (05) : 312 - 317
  • [10] Influence of post-weld heat treatment on welding residual stress in U-rib-to-deck joint
    Qiang, Bin
    Xie, Yunjie
    Xie, Qiang
    Shi, Jingyu
    Liu, Xinran
    Yao, Changrong
    Li, Yadong
    THIN-WALLED STRUCTURES, 2024, 196
12345