Inferring viscoelastic dynamic material properties from finite element and experimental studies of beams with constrained layer damping

Viscoelastic materials are often used to add damping to metal structures, usually via the constrained layer damping method. The added damping depends strongly on material temperature and frequency, as do the underlying material properties of the viscoelastomer Several standardized test methods are available to characterize the dynamic material properties of viscoelastomers. However they rely on limited test data which is extrapolated using the time-temperature superposition technique. The authors have found that the different testing methods typically produce significantly different dynamic material properties, or "master curves. " An approach for inferring viscoelastomer dynamic moduli with better accuracy is suggested here. Several metal bars are treated using constrained layer damping. Experimental modal analyses are conducted on the bars at different temperatures to produce sets of system resonance frequencies and loss factors. Corresponding finite element (FE) models of the treated bars are analyzed using assumed viscoelastomer material properties based on master curves generated using a standardized test technique. The parameters which define the master curves are adjusted by trial and error until the FE-simulated system loss factors match those of the measurements. The procedure is demonstrated on two viscoelastomers with soft and stiff moduli.