Hazardous elements flow during pyrolysis of oily sludge

Oily sludge (OS) is a hazardous waste and pyrolysis is a promising technology to achieve energy recovery and non-hazardous disposal simultaneously. However, the distribution of hazardous elements, including N/S/Cl and heavy metals, in pyrolytic products possibly causes secondary pollution. This study conducted a systematic research on hazardous elements flow during OS pyrolysis under variant temperature. Results showed that N/S/Cl in OS were distributed 44.77-15.51 wt%, 83.29-80.22 wt%, and 78.59-73.41 wt% into the solid residues after pyrolysis, respectively. Elevating pyrolysis temperature facilitated more N/S/Cl flowing into pyrolytic oil and gas. The macromolecular N-/S-/Cl-containing compounds, including amides, amines, nitrites, sulfonates, chloroalkanes, etc., were widely distributed in pyrolytic oil and gas products. The micromolecular N-/S-/Cl-containing pollutants released between 200 and 400 degrees C included HCN, NH3, NOx, H2S, CH4S, CS2, SO2, and HCl, which originated from the decomposition of the amine N, organic sulfide and sulfone-S, and inorganic Cl, respectively. The main pollutants released at above 400 degrees C included NH3, HCN, NOx, CS2, and SO2, which were derived from the decomposition of heterocyclic N and inorganic pyritic-S and sulfate-S. Moreover, the solid residues intercepted more than 60.0 wt% of total heavy metals, which should be concerned in the future.