The effects of manganese ions on rheology and thermal properties of polyether ether ketone

被引:2
|
作者
Su, Yang [1 ]
Wang, Tao [1 ]
Dang, Guodong [1 ]
Zhou, Hongwei [1 ]
Chen, Chunhai [1 ]
机构
[1] Jilin Univ, Coll Chem, Alan G MacDiarmid Lab, Changchun 130012, Jilin, Peoples R China
关键词
Polyether ether ketone; manganese; mobility; rheology; MELT FLOW-RATE; POLYMER MELTS; ROTATIONAL RHEOMETER; CAPILLARY RHEOMETER; COMPOSITES; BLENDS; POLYPROPYLENE; QUALITY; POWDERS; SIZE;
D O I
10.1177/0954008316649421
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Polyether ether ketone (PEEK) mixed with manganese (Mn) of different valences was prepared to simulate conditions of impurity. The melt flow rate (MFR) and rheological behaviour were systematically studied to characterize the mobility from different angles. MFR test was used for the preliminary exploration of mixtures of Mn ions. The results showed that Mn, Mn(II), and Mn(IV) had little impact on the mobility of PEEK contrary to Mn(VII) and that long chain branching or cross-linking was suspected. Mn(VII) was determined to be the main object of this research. Capillary rheometer test demonstrated that the apparent shear viscosity constantly reduced with the increase of apparent shear rate, and that the addition of Mn(VII) could worsen the mobility of PEEK. Similarly, parallel plate rheometer studies proved that the complex viscosity increased along with the content of Mn(VII) and LCB was confirmed. Thermal analysis revealed that LCB occurred internally and that thermal stability was worse.
引用
收藏
页码:377 / 385
页数:9
相关论文
共 50 条
  • [1] The Effect of Ions Irradiation on the Thermal Properties of Poly(ether ether ketone)
    Al Lafi, Abdul G.
    Hay, James N.
    Parker, David J.
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2008, 46 (20) : 2212 - 2221
  • [2] Rheology and Mechanics of Polyether(ether)ketone - Polyetherimide Blends for Composites in Aeronautics
    Rosa, Mattia
    Grassia, Luigi
    D'Amore, Alberto
    Carotenuto, Claudia
    Minale, Mario
    VIII INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY, 2016, 1736
  • [3] Effect of thermal oxygen aging on the crystallization and insulation properties of polyether ether ketone
    Li, Danyu
    Xu, Siyi
    Li, Jianxi
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (16)
  • [4] Thermal Expansion of Polyether Ether Ketone Bearing Components
    Allison, Bryan D.
    Vanderwiel, Conner M.
    JOURNAL OF THE AMERICAN HELICOPTER SOCIETY, 2019, 64 (04)
  • [5] Effects of Load and Velocity on the Friction Properties of Polyether-Ether-Ketone Composites
    Yue S.
    Pang X.
    Niu Y.
    Huang S.
    Cailiao Daobao/Materials Reports, 2022, 36 (16):
  • [6] On the thermal processing and mechanical properties of 3D-printed polyether ether ketone
    Wang, Russell
    Cheng, Kang-jie
    Advincula, Rigoberto C.
    Chen, Qiyi
    MRS COMMUNICATIONS, 2019, 9 (03) : 1046 - 1052
  • [7] On the thermal processing and mechanical properties of 3D-printed polyether ether ketone
    Russell Wang
    Kang-jie Cheng
    Rigoberto C. Advincula
    Qiyi Chen
    MRS Communications, 2019, 9 : 1046 - 1052
  • [8] Study on the preparation and properties of sulfonated polyether ether ketone membranes
    Li, L
    Xu, L
    Wang, YX
    ACTA POLYMERICA SINICA, 2003, (03) : 452 - 455
  • [9] INFLUENCE OF MICROSTRUCTURE ON ELASTIC AND VISCOELASTIC PROPERTIES OF POLYETHER ETHER KETONE
    OGALE, AA
    MCCULLOUGH, RL
    COMPOSITES SCIENCE AND TECHNOLOGY, 1987, 30 (03) : 185 - 201
  • [10] Polyether Ether Ketone (PEEK) Properties and Its Application Status
    Ling, Xuanzhe
    Jing, Xishuang
    Zhang, Chengyang
    Chen, Siyu
    2019 5TH INTERNATIONAL CONFERENCE ON GREEN MATERIALS AND ENVIRONMENTAL ENGINEERING, 2020, 453