Hysteresis Loss Evaluation of Additively Manufactured Soft Magnetic Core

被引：0
|
作者：
Tiismus, Hans [1 ]
Kallaste, Ants [1 ]
Belahcen, Anouar [1 ,2 ]
Rassolkin, Anton [1 ]
Vaimann, Toomas [1 ]
机构：
[1] Tallinn Univ Technol, Dept Elect Power Engn & Mechatron, Tallinn, Estonia
[2] Aalto Univ, Dept Elect Engn & Automat, Espoo, Finland
来源：
2020 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), VOL 1 | 2020年
关键词：
Electric machines; Manufacturing processes; Magnetic materials; Three-dimensional printing; Iron losses; Annealing;
D O I：
10.1109/icem49940.2020.9270836
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Magnetic properties of additively manufactured soft ferromagnetic nonlaminated material is investigated and its DC magnetic losses determined. Ring samples from 4% silicon content electrical steel powder are prepared with a selective laser melting system. Sample hysteresis losses are determined experimentally with quasi-static measurements at 25 mHz magnetization frequency. Material hysteresis power losses ranged from 0.925 W/kg (1 T, 50 Hz) and 2.85 W/kg (1.5 T, 50 Hz) W/kg. Additionally, the results are compared with hysteresis losses obtained though the extrapolation of losses data measured at higher frequencies of 1, 10, 30 and 50 Hz. Correlation between the quasi-static and extrapolated results is obtained below the knee-point of the material, at 0.8 T and 1 T. The results are compared to other conventional electrical steel and 3D printed materials.
引用
收藏
页码：1657 / 1661
页数：5
相关论文
共 50 条
  • [1] Hysteresis Modelling in Additively Manufactured FeSi Magnetic Components for Electrical Machines and Drives
    Faba, Antonio
    Fulginei, Francesco Riganti
    Antonio, Simone Quondam
    Stornelli, Giulia
    Schino, Andrea Di
    Cardelli, Ermanno
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2024, 71 (03) : 2188 - 2197
  • [2] Laser Additively Manufactured Magnetic Core Design and Process for Electrical Machine Applications
    Tiismus, Hans
    Kallaste, Ants
    Vaimann, Toomas
    Lind, Liina
    Virro, Indrek
    Rassolkin, Anton
    Dedova, Tatjana
    [J]. ENERGIES, 2022, 15 (10)
  • [3] A Novel Hysteresis Core Loss Model for Magnetic Laminations
    Zhang, Yu
    Cheng, Ming C.
    Pillay, Pragasen
    [J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2011, 26 (04) : 993 - 999
  • [4] Magnetic Behavior and Loss Assessment of Additively Manufactured Fe-Si alloys
    Cavagnino, Andrea
    Vaschetto, Silvio
    Poskovic, Emir
    Fortunato, Alessandro
    Liverani, Erica
    [J]. 2023 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE, IEMDC, 2023,
  • [5] Hysteresis loop modeling techniques and hysteresis loss estimation of soft magnetic materials
    Faiz, J
    Sharifian, MBB
    [J]. COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2001, 20 (04) : 988 - 1001
  • [6] Dynamic hysteresis and power loss modelling in soft magnetic materials
    Bertotti, G
    [J]. NONLINEAR ELECTROMAGNETIC SYSTEMS, 1996, 10 : 505 - 510
  • [7] Evaluation of Anisotropy of Additively Manufactured Structures
    Klimtova, Marketa
    Vesely, Petr
    [J]. 2021 44TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2021,
  • [8] Reduction of hysteresis loss in soft magnetic composites under transverse magnetic field
    Feng, S. J.
    Ni, J. L.
    Hu, F.
    Kan, X. C.
    Lv, Q. R.
    Yang, Y. J.
    Liu, X. S.
    [J]. APPLIED PHYSICS LETTERS, 2020, 117 (12)
  • [9] Design of an additively manufactured soft ring-gripper
    Schreiber, Florian
    Manns, Martin
    Morales, Jorge
    [J]. 7TH INTERNATIONAL CONFERENCE ON CHANGEABLE, AGILE, RECONFIGURABLE AND VIRTUAL PRODUCTION (CARV2018), 2019, 28 : 142 - 147
  • [10] Deep drawability of additively manufactured sheets with a structured core
    Stephan Rosenthal
    Marlon Hahn
    A. Erman Tekkaya
    [J]. International Journal of Material Forming, 2023, 16
12345