Properties, Microstructure and Heat Seal Ability of Bilayer Films Based on Fish Gelatin and Emulsified Gelatin Films

Bilayer films prepared by the lamination of fish gelatin film (GF) and its corresponding emulsified film (EF) with different thickness ratios (7:3, 5:5 and 3:7) were characterized. Bilayer films had the similar tensile strength (TS) to EF (p > 0.05) but showed lower elongation at break (EAB) (p < 0.05). All bilayer films showed the lower water vapor permeability (WVP) but higher oxygen permeability (OP) than GF. Bilayer films had varying Delta E* (total color different), where the highest value was observed in that laminated with higher thickness ratio of EF (p < 0.05). Lower light transmission and higher transparency value were obtained for bilayer films, compared to GF (p < 0.05). Based on scanning electron microscopic (SEM) cross-section micrographs, all bilayer films consisted of two layers. Differential scanning calorimetric (DSC) analysis revealed that the bilayer films had the higher glass transition temperature (T (g)) than GF but lower than EF. All bilayer films were heat sealable, however their seal strength and seal efficiency were lower than those of GF (p < 0.05). Therefore, the thickness ratios of GF and EF had a marked effect on the mechanical and barrier properties as well as heat sealing ability of resulting bilayer films.