Investigation of the Tribological Properties of the Nitride Layer on Heat-Treated Steel 100Cr6

被引：3
|
作者：
Broncek, Jozef [1 ]
Vicen, Martin [1 ]
Fabian, Peter [1 ]
Radek, Norbert [2 ]
机构：
[1] Univ Zilina, Univ 8215-1, Zilina 01026, Slovakia
[2] Kielce Univ Technol, Al Tysiaclecia Panstwa Polskiego 7, Kielce, Poland
来源：
CURRENT METHODS OF CONSTRUCTION DESIGN | 2020年
关键词：
Tribology; Nitride layer; Ball on disc; Steel;
D O I：
10.1007/978-3-030-33146-7_53
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The article deals with the tribological properties of the heat-treated steel 100Cr6 and the nitride layer formed on this steel. Steel 100Cr6 is a bearing steel that is used to make bearings' rings and bearings' elements. The reason for the formation of nitride layer on heat-treated steel 100Cr6 is the decrease of the friction coefficient. The reduction of friction coefficient contributes to reduce wear and, at the same time, increases the lifetime of the rings and elements of roller bearings during their work time. Experimental measurements were realized on the experimental device rotary microtribometer working on principle "ball on disc". The aim of tribological tests is to determine the coefficient of friction of material pairs, compare them and then evaluate them. Based on the results, the suitability of the nitride layer for the bearing materials is determined. The results will be suitable not only for bearing materials but also for a wide range of iron-based materials.
引用
收藏
页码：463 / 471
页数：9
相关论文
共 50 条
  • [1] Investigation of tribological properties of CarbonX coating deposited on 100Cr6 steel
    Vicen, Martin
    Broncek, Jozef
    Novy, Frantisek
    [J]. PRODUCTION ENGINEERING ARCHIVES, 2019, 25 (25) : 52 - 55
  • [2] The Effect of Boriding and Heat Treatment on the Structure and Properties of 100Cr6 Steel
    Bricin, David
    Kriz, Antonin
    Novotny, Jan
    Spirit, Zbynek
    [J]. MANUFACTURING TECHNOLOGY, 2022, 22 (01): : 2 - 13
  • [3] Laser peening processing effect on mechanical and tribological properties of rolling steel 100Cr6
    Yakimets, I
    Richard, C
    Béranger, G
    Peyre, P
    [J]. WEAR, 2004, 256 (3-4) : 311 - 320
  • [4] Wear Behaviour of Heat Treated 100Cr6 Steels
    Polat, Seyda
    Turedi, Enbiya
    Atapek, S. Hakan
    Koseoglu, Merve
    [J]. MATERIALS TESTING, 2013, 55 (04) : 290 - 293
  • [5] Tribological behaviour of microindented 100Cr6 steel surfaces in dry contact conditions
    Guglielmi, Pasquale
    Davoodi, Farideh
    Palumbo, Gianfranco
    Carbone, Giuseppe
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (5-6): : 2381 - 2400
  • [6] Microstructures and tribological properties of GLC coated 100Cr6 bearing steels
    Kong, Yonghua
    Chen, Qiao
    Wang, Long
    [J]. MATERIALS RESEARCH EXPRESS, 2017, 4 (11):
  • [7] Tribological behaviour of microindented 100Cr6 steel surfaces in dry contact conditions
    Guglielmi, Pasquale
    Davoodi, Farideh
    Palumbo, Gianfranco
    Carbone, Giuseppe
    [J]. International Journal of Advanced Manufacturing Technology, 2024,
  • [8] The role of surface carbon contamination on the tribological properties of ion-implanted 100Cr6 bearing steel
    Faussemagne, A
    Benyagoub, A
    Kapsa, P
    Jaffrezic, H
    Marest, G
    [J]. MATERIALS SCIENCE APPLICATIONS OF ION BEAM TECHNIQUES, 1997, 248-2 : 185 - 188
  • [9] Mechanical Properties of spray compacted Steel 100Cr6 Part 4: Material Development by Spray Compacting using the Example of Steel 100Cr6
    Tinscher, R.
    Bomas, H.
    [J]. HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2005, 60 (03): : 132 - 141
  • [10] Effect of 160 MeV Xenon Ion Irradiation on the Tribological Properties and Crystal Structure of 100Cr6 Bearing Steel
    Kaminski, Mariusz
    Budzynski, Piotr
    Surowiec, Zbigniew
    Wiertel, Marek
    Zdorovets, Maxim V.
    Kozlovskiy, Artem
    Waliszewski, Janusz
    Magdziak, Marek
    [J]. MATERIALS, 2023, 16 (20)
12345