The Reinforcement Effect of Carbon Fiber on the Friction and Wear Properties of Carbon Fiber Reinforced PA6 Composites

被引：34
|
作者：
Li, J. [1 ]
Xia, Y. C. [1 ]
机构：
[1] Shanghai Second Polytech Univ, Sch Mech & Elect Engn, Shanghai 201209, Peoples R China
来源：
FIBERS AND POLYMERS | 2009年 / 10卷 / 04期
关键词：
Tribological; Polyamide; 6; SEM; Wear reduction; ABRASIVE WEAR; TRIBOLOGICAL PROPERTIES; BEHAVIOR; POLYAMIDE-6; CONTACT; BLENDS; PEEK;
D O I：
10.1007/s12221-009-0519-5
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
The tribological performance of PA6 and carbon fiber reinforced polyamide 6 (CF/PA6) under dry sliding condition was examined. Different contents of carbon fibers were employed as reinforcement. All filled and unfilled polyamide 6 composites were tested against CGr15 ball and representative testing was performed. The effects of carbon fiber content on tribological properties of the composites were investigated. The worn surface morphologies of neat PA6 and its composites were examined by scanning electron microscopy (SEM) and the wear mechanisms were discussed. Moreover, all filled polyamide 6 have superior tribological characteristics to unfilled polyamides 6. The optimum wear reduction was obtained when the content of carbon fiber is 20 vol%.
引用
收藏
页码：519 / 525
页数：7
相关论文
共 50 条
  • [1] The reinforcement effect of carbon fiber on the friction and wear properties of carbon fiber reinforced PA6 composites
    J. Li
    Y. C. Xia
    [J]. Fibers and Polymers, 2009, 10 : 519 - 525
  • [2] The Friction and Wear Properties of Thermoplastic PA6 Composites Filled with Carbon Fiber
    Li, J.
    Xia, Y. C.
    [J]. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2010, 23 (03) : 337 - 349
  • [3] Effect of carbon fibre content on friction and wear properties of carbon fibre reinforced PA6 composites
    Nie, W. Z.
    Li, J.
    [J]. PLASTICS RUBBER AND COMPOSITES, 2010, 39 (01) : 10 - 15
  • [4] Effect of Carbon Fiber Reinforcement on the Mechanical and Tribological Properties of PA6/PPS Composites
    Zhou, Shaofeng
    Wu, Chaoqun
    Chen, Lianhui
    Zhang, Qiaoxin
    [J]. NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 2323 - +
  • [5] Effect of amorphous carbon coating of carbon fiber on mechanical properties of carbon fiber reinforced PA6
    Tanaka, Kazuto
    Habe, Ririko
    Katayama, Tsutao
    Nakatsuka, Kazuki
    [J]. Zairyo/Journal of the Society of Materials Science, Japan, 2020, 69 (05) : 365 - 372
  • [6] The effect of carbon fiber wear properties of carbon composites content on the friction and fiber reinforced polyimide
    Li, Jian
    Cheng, Xianhua
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 107 (03) : 1737 - 1743
  • [7] The effect of carbon fiber content on the friction and wear properties of carbon fiber reinforced polyimide composites
    Li, Jian
    Cheng, Xianhua
    [J]. Journal of Applied Polymer Science, 1600, 107 (03): : 1737 - 1743
  • [8] Evaluation of Tribological Properties of Carbon Fiber-Reinforced PA6 Composites
    Li, J.
    Xia, Y. C.
    [J]. POLYMER COMPOSITES, 2010, 31 (03) : 536 - 542
  • [9] Friction and wear properties of carbon fiber reinforced polypropylene composites
    Li, Jian
    Cai, Chilan
    [J]. MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 2380 - 2383
  • [10] Friction and wear properties of UHMWPE composites reinforced with carbon fiber
    Xiong, DS
    [J]. MATERIALS LETTERS, 2005, 59 (2-3) : 175 - 179
12345