SIMULATION STUDY OF ACTIVE VIBRATION CONTROL OF CANTILEVER BEAM BY USING STATE AND OUTPUT FEEDBACK CONTROL LAWS

被引:0
|
作者
Khot, S. M. [1 ]
Yelve, Nitesh P. [1 ]
Nair, Raj [2 ]
机构
[1] Fr C Rodrigues Inst Technol, Dept Mech Engn, Vashi, Navi Mumbai, India
[2] Univ Colorado, Dept Mech Engn, Boulder, CO 80309 USA
关键词
Active Vibration Control; Cantilever Beam; Optimal Control; State Feedback; Output Feedback;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Undesired noise and vibrations have a detrimental effect in many areas. Hence the control of vibrations has become a relevant technological challenge. Active vibration control of structures using smart materials especially is in vogue. It involves sensing the motion of the structure using sensors, generating a control signal using a controller and applying a control force on the structure using actuators. To design the control system of any vibrating structure, the mathematical model of the system is required. However, it is not possible, to theoretically construct the model of complex structures. On the other hand, it is relatively simpler to model such systems in an Finite Element (FE) environment like ANSYS (c). This paper deals with the extraction of the mathematical model of a cantilever beam from its FEA model. This procedure of extraction is applicable to any mechanical system under dynamics study. Then again, the matrices thus formed are usually very large and require a lot of computational time to process. Hence an attempt is made to construct the reduced model of the system which approximates the actual model to the desired extent. In this paper, the full model of the beam is reduced by discarding those modes which do not contribute to the overall response on the basis of their dc gains in MATLAB (c). It is found that the frequency and transient responses of the full and reduced models match closely. Hence the reduced model may be used to represent the system instead of the full model with reasonable accuracy. Design of controller is attempted using the theory of state and output feedback control laws. The controller is modeled by calculating the optimal control gain by formulating an algorithm to solve the equations involved. The transient and frequency responses of the controlled full model and reduced models are then plotted. The procedure for designing controller described in this paper may be extended to any real world system.
引用
收藏
页数:12
相关论文
共 50 条
  • [1] Active vibration control of cantilever beam by using PID based output feedback controller
    Khot, S. M.
    Yelve, Nitesh P.
    Tomar, Rajat
    Desai, Sameer
    Vittal, S.
    [J]. JOURNAL OF VIBRATION AND CONTROL, 2012, 18 (03) : 366 - 372
  • [2] Vibration control of a cantilever beam with time delay state feedback
    El-Bassiouny, Atef F.
    [J]. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES, 2006, 61 (12): : 629 - 640
  • [3] Experimental Study of Active Vibration Control of a Cantilever Beam
    Khot, S. M.
    Yelve, Nitesh P.
    Shaik, Shoaib
    [J]. 2013 Sixth International Conference on Emerging Trends in Engineering and Technology (ICETET 2013), 2013, : 1 - 6
  • [4] Positive Position Feedback Active Vibration Control of a Smart Cantilever Beam Using ANSYS
    El Badawy, A. A.
    El Masry, M. M.
    [J]. PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON ELECTRICAL, AUTOMATION AND MECHANICAL ENGINEERING (EAME 2015), 2015, 13 : 509 - 514
  • [5] Optimizing time delay feedback for active vibration control of a cantilever beam using a genetic algorithm
    Mirafzal, Seyed Hamed
    Khorasani, Amir Mahyar
    Ghasemi, Amir Hossein
    [J]. JOURNAL OF VIBRATION AND CONTROL, 2016, 22 (19) : 4047 - 4061
  • [6] Vibration Control of Smart Cantilever Beam using Strain Rate Feedback
    Weldegiorgis, Riessom
    Krishna, Prasad
    Gangadharan, K. V.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 113 - 122
  • [7] Active Vibration Control of Piezoelectricity Cantilever Beam Using an Adaptive Feedforward Control Method
    Yue, Jun-Zhou
    Zhu, Qiao
    [J]. 2017 6TH DATA DRIVEN CONTROL AND LEARNING SYSTEMS (DDCLS), 2017, : 117 - 122
  • [8] ACTIVE VIBRATION CONTROL OF A CANTILEVER BEAM USING PIEZOELECTRIC SENSORS AND ACTUATORS
    Lu Xiaobo Tao Yungang He Yanwei Department of Measurement and Testing Engineering
    [J]. Transactions of Nanjing University of Aeronautics and Astronautics, 1997, (01) : 70 - 75
  • [9] Active vibration control of glass-epoxy composite box beam using output feedback
    Jain, Saurabh
    Manjunath, T. C.
    Bandyopadhyay, B.
    [J]. 2006 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS 1-6, 2006, : 2330 - +
  • [10] Adaptive output feedback force control of a cantilever beam using a piezoelectric actuator
    Yim, W
    Singh, SN
    [J]. JOURNAL OF VIBRATION AND CONTROL, 2003, 9 (05) : 567 - 581