Jute fabrics-reinforced polypropylene (PP) composites (50% fiber) were prepared by compression molding. Composites were fabricated with non-irradiated jute fabrics/non-irradiated PP (C-0), non-irradiated jute fabrics/irradiated PP (C-1), irradiated jute fabrics/non-irradiated PP (C-2) and irradiated jute fabrics/irradiated PP (C-3). It was found that C-3 composite performed the best mechanical properties over other composites. Total radiation dose varied from 250-1000 krad and composites made of using 500 krad showed the best results. The optimized values (C-3 composites) for tensile strength (TS), bending strength (BS) and impact strength (IS) were found to be 63 MPa, 73 MPa and 2.93 kJ/m(2), respectively. (C) 2009 Elsevier Ltd. All rights reserved.
机构:
Department of Mechanical Engineering, M'sila University
Laboratory of Non Metallic Materials, Setif UniversityDepartment of Mechanical Engineering, M'sila University
Rokbi M.
Khaldoune A.
论文数: 0引用数: 0
h-index: 0
机构:
Department of Mechanical Engineering, M'sila UniversityDepartment of Mechanical Engineering, M'sila University
Khaldoune A.
Sanjay M.R.
论文数: 0引用数: 0
h-index: 0
机构:
Department of Mechanical Engineering, Ramaiah Institute of Technology, Bengalore, 560054, Karnataka
Department of Mechanical and Process Engineering, The Sirindhorn International Thai German Graduate School of Engineering (TGGS), King Mongkut's University of Technology North Bangkok, BangkokDepartment of Mechanical Engineering, M'sila University
Sanjay M.R.
Senthamaraikannan P.
论文数: 0引用数: 0
h-index: 0
机构:
Department of Mechanical Engineering, Kamaraj College of Engineering and Technology, Virudhunagar, 626001, Tamil NaduDepartment of Mechanical Engineering, M'sila University
Senthamaraikannan P.
Ati A.
论文数: 0引用数: 0
h-index: 0
机构:
Laboratory of Biochemistry, Biophysics, Biomathematics and Scientometry, Bejaia UniversityDepartment of Mechanical Engineering, M'sila University
Ati A.
Siengchin S.
论文数: 0引用数: 0
h-index: 0
机构:
Department of Mechanical and Process Engineering, The Sirindhorn International Thai German Graduate School of Engineering (TGGS), King Mongkut's University of Technology North Bangkok, BangkokDepartment of Mechanical Engineering, M'sila University