Electrodeposition and mechanical and corrosion resistance properties of Ni-W/SiC nanocomposite coatings

被引:157
|
作者
Yao, Yingwu
Yao, Suwei [1 ]
Zhang, Lu
Wang, Hongzhi
机构
[1] Tianjin Univ, Sch Chem Engn & Technol, Sugiyama Lab Surface Technol, Tianjin 300072, Peoples R China
[2] Tianjin Polytech Univ, Sch Text, Tianjin 300160, Peoples R China
关键词
electrodeposition; Ni-W alloy coating; SiC nano-particulates; Ni-W/SiC nanocomposite coatings;
D O I
10.1016/j.matlet.2006.04.007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Ni-W/SiC natiocomposite coatings with various contents of SiC nano-particulates were prepared by electrodeposition in Ni-W plating bath containing SiC particulates. The influences of the SiC nano-particulates concentration, current density and stirring rate of the plating bath on the composition of the nanocomposite coatings were investigated. The surface morphologies of the Ni-W alloy and Ni-W/SiC nanocomposite coating were observed using a scanning electron microscope (SEM). The morphology of Ni-W/SiC nanocomposite coating is smoother than that of Ni-W alloy coating. The microhardness of composite coatings increases with the increasing content of the SiC nano-particulates in the coatings. The corrosion behavior of Ni-W alloy and Ni-W/SiC nanocomposite coatings was evaluated by the anodic polarization curves in 0.5 mol/L NaC1 solution at room temperature. It shows that Ni-W/SiC nanocomposite coating has better corrosion resistance than the Ni-W alloy coating. (c) 2006 Elsevier B.V All rights reserved.
引用
收藏
页码:67 / 70
页数:4
相关论文
共 50 条
  • [1] Preparation, mechanical properties and wear resistance of Ni-W/SiC nanocomposite coatings
    Yao, Y. W.
    Yao, S. W.
    Zhang, L.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2008, 24 (02) : 237 - 240
  • [2] Electrodeposition and mechanical and corrosion resistance properties of tertiary Ni-W/Al2O3/CNT nanocomposite coatings
    Aliofkhazraei, Mahmood
    Rouhaghdam, Alireza Sabour
    Ghobadi, Ehsan
    Mohsenian, Ehsan
    [J]. THERMEC 2009 SUPPLEMENT: 6TH INTERNATIONAL CONFERENCE ON PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, 2010, 89-91 : 12 - +
  • [3] Pulsed electrodeposition, mechanical properties and wear mechanism in Ni-W/SiC nanocomposite coatings used for automotive applications
    Wasekar, Nitin P.
    Bathini, Lavakumar
    Ramakrishna, L.
    Rao, D. Srinivasa
    Padmanabham, G.
    [J]. APPLIED SURFACE SCIENCE, 2020, 527
  • [4] Pulse electrodeposition and corrosion behavior of Ni-W/MWCNT nanocomposite coatings
    Li, Han
    He, Yi
    Fan, Yi
    Xu, Wei
    Yang, Qiangbin
    [J]. RSC ADVANCES, 2015, 5 (84): : 68890 - 68899
  • [5] Pulsed electrodeposition and mechanical properties of Ni-W/SiC nano-composite coatings
    Wasekar, Nitin P.
    Latha, S. Madhavi
    Ramakrishna, M.
    Rao, D. S.
    Sundararajan, G.
    [J]. MATERIALS & DESIGN, 2016, 112 : 140 - 150
  • [6] Effect of SiC on Corrosion and Wear Resistance of Ni-W Coatings
    Li Baosong
    Zhang Wen
    Huan Yuxing
    Zhang Weiwei
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (10) : 3129 - 3134
  • [7] Effect of Pulse Electrodeposition Parameters on the Microstructure and Mechanical Properties of Ni-W/B Nanocomposite Coatings
    Das, Malay Kumar
    Urumarudappa, Santhosh Kumar J.
    Kamal, Sarwar
    Widiadita, Yoanda
    Mahamud, Arif
    Saito, Thiranan Inthawong
    Bovornratanaraks, Thiti
    [J]. NANOMATERIALS, 2022, 12 (11)
  • [8] Pulse current electrodeposition and corrosion properties of Ni-W alloy coatings
    Zemanova, M.
    Krivosudska, M.
    Chovancova, M.
    Jorik, V.
    [J]. JOURNAL OF APPLIED ELECTROCHEMISTRY, 2011, 41 (09) : 1077 - 1085
  • [9] Investigation of corrosion resistance of electrodeposited Ni-W/SiC composite coatings
    Hosseini, M. G.
    Abdolmaleki, M.
    Ghahremani, J.
    [J]. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2014, 49 (04) : 247 - 253
  • [10] Electrodeposition of multilayer Ni-W and Ni-W-alumina nanocomposite coatings
    Allahyarzadeh, M.
    Aliofkhazraei, M.
    Rouhaghdam, A. S.
    Torabinejad, V.
    [J]. SURFACE ENGINEERING, 2017, 33 (05) : 327 - 336