Improving mild steel corrosion resistance in tap water: Influence of water flow and supply rates

The mild steel corrosion has been studied in hot tap water (50 degrees C) using linear polarization technique in the laboratory set-up that models water circulating system. The influence of water flow rate (0.15- 0.45 m/s) and water supply rate (0-70 % of system volume per hour) on corrosion kinetics have been investigated. The corrosion products, formed on the surface of the steel corrosion probes, have been analyzed with XRD. It has been found, that in condition of low water flow rate (0.15 m/s) and in the absence of water supply the corrosion rate is high (0.29 mm/year) due to low blocking abilities of the surface deposits. Amorphous Fe(OH)3 is the main corrosion product to be detected on the surface. The increase in water flow rate above 0.15 m/s and water supply rate above 30 % of system volume per hour leads to the 1.6 times corrosion rate reduction (to 0.18 mm/year) due to the formation of dense surface layer of calcium carbonate and iron oxyhydroxides. The results obtained can be utilized to improve the corrosion performance of hot water supply systems. (c) 2019 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 4th ISE Satellite Student Regional Symposium on Electrochemistry in Ukraine Promising Materials and Processes in Applied Electrochemistry-2019